기기를 수리하세요 커뮤니티 상점

Hoover T-Series WindTunnel Pet UH30310 Height Adjustment Wheels Replacement

소개

Instructions on how to replace the height adjustment wheels at the bottom of the vacuum.

필요한 것

  1. Hoover T-Series WindTunnel Pet UH30310 Height Adjustment Wheels Replacement, Height Adjustment Wheels: 1 단계, 이미지 1/2 Hoover T-Series WindTunnel Pet UH30310 Height Adjustment Wheels Replacement, Height Adjustment Wheels: 1 단계, 이미지 2/2

    • Place the vacuum on its back.

    • Push the red switch to the left.

    • The black cover will then pop out. Remove the cover.

    편집

  2. Hoover T-Series WindTunnel Pet UH30310 Height Adjustment Wheels Replacement: 2 단계, 이미지 1/3 Hoover T-Series WindTunnel Pet UH30310 Height Adjustment Wheels Replacement: 2 단계, 이미지 2/3 Hoover T-Series WindTunnel Pet UH30310 Height Adjustment Wheels Replacement: 2 단계, 이미지 3/3

    • Locate the red switch near the head of the vacuum.

    • Push the switch left.

    • This will pop out the plastic base plate. Remove the plate from the vacuum.

    편집

  3. Hoover T-Series WindTunnel Pet UH30310 Height Adjustment Wheels Replacement: 3 단계, 이미지 1/3 Hoover T-Series WindTunnel Pet UH30310 Height Adjustment Wheels Replacement: 3 단계, 이미지 2/3 Hoover T-Series WindTunnel Pet UH30310 Height Adjustment Wheels Replacement: 3 단계, 이미지 3/3

    • Use a Phillips #1 screwdriver to remove the screws from the right side of the white plastic frame.

    편집

  5. Hoover T-Series WindTunnel Pet UH30310 Height Adjustment Wheels Replacement: 4 단계, 이미지 1/3 Hoover T-Series WindTunnel Pet UH30310 Height Adjustment Wheels Replacement: 4 단계, 이미지 2/3 Hoover T-Series WindTunnel Pet UH30310 Height Adjustment Wheels Replacement: 4 단계, 이미지 3/3

    • Remove screws from the left side of the white plastic frame.

    편집

  6. Hoover T-Series WindTunnel Pet UH30310 Height Adjustment Wheels Replacement: 5 단계, 이미지 1/3 Hoover T-Series WindTunnel Pet UH30310 Height Adjustment Wheels Replacement: 5 단계, 이미지 2/3 Hoover T-Series WindTunnel Pet UH30310 Height Adjustment Wheels Replacement: 5 단계, 이미지 3/3

    • Pull the white plastic frame away from the vacuum.

    • Slide the vacuum belt off the metal rod.

    • Pull the brush off the vacuum.

    편집

  7. Hoover T-Series WindTunnel Pet UH30310 Height Adjustment Wheels Replacement: 6 단계, 이미지 1/2 Hoover T-Series WindTunnel Pet UH30310 Height Adjustment Wheels Replacement: 6 단계, 이미지 2/2

    • Remove the screws at the bottom of the white frame near the roller.

    편집

  8. Hoover T-Series WindTunnel Pet UH30310 Height Adjustment Wheels Replacement: 7 단계, 이미지 1/3 Hoover T-Series WindTunnel Pet UH30310 Height Adjustment Wheels Replacement: 7 단계, 이미지 2/3 Hoover T-Series WindTunnel Pet UH30310 Height Adjustment Wheels Replacement: 7 단계, 이미지 3/3

    • Pop off the right side of the white frame.

    • Pull down the blue hinge and roller.

    • Pull free the roller from the vacuum.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Nathan Yung

회원 가입일: 01/18/18

241 평판

안내서 2개 작성하였습니다

배지: 3

팀

Cal Poly, Team S12-G4, Banghart Winter 2018 Cal Poly, Team S12-G4, Banghart Winter 2018 회원

CPSU-BANGHART-W18S12G4

5 회원들

안내서 9개 작성하였습니다

댓글 2개

HOOVER 30310 brush roller stops when the handle is released for vacuuming. Begins again when handle raised and locked into upright position.

David Blair - 답글

Hoover wind tunnel three pet quick pass. Roller spins in an upright position (locked handle). Foot pedal tensioner and off works, but will not stay in off position.

Kirk Teichert - 답글

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 17

30일 전: 40

전체 시간: 2,299