Hoover T-Series WindTunnel Pet UH30310 Inlet Filter Replacement - iFixit 수리 안내서

소개

This guide will help you into replacing the inlet filter in the body of the vacuum.

필요한 것

1 단계 Inlet Filter

Hoover T-Series WindTunnel Pet UH30310 Inlet Filter Replacement, Inlet Filter: 1 단계, 이미지 1/2

Hoover T-Series WindTunnel Pet UH30310 Inlet Filter Replacement, Inlet Filter: 1 단계, 이미지 2/2

Remove the frame of the vacuum by pinching the tab down and pulling the frame away from the vacuum body.

2 단계

Hoover T-Series WindTunnel Pet UH30310 Inlet Filter Replacement: 2 단계, 이미지 1/2

Hoover T-Series WindTunnel Pet UH30310 Inlet Filter Replacement: 2 단계, 이미지 2/2

Locate the large sieve at the bottom of the vacuum body.
Lift off the sieve, separating it from the filter.

3 단계

Hoover T-Series WindTunnel Pet UH30310 Inlet Filter Replacement: 3 단계, 이미지 1/1

Remove the old inlet filter from the vacuum body and replace with the new filter.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Nathan Yung

회원 가입일: 01/18/18

241 평판

안내서 2개 작성하였습니다

팀

Cal Poly, Team S12-G4, Banghart Winter 2018 Cal Poly, Team S12-G4, Banghart Winter 2018 회원

CPSU-BANGHART-W18S12G4

5 회원들

안내서 9개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 6

전체 시간: 350