기기를 수리하세요 커뮤니티 상점

Hoover T-Series WindTunnel Pet UH30310 Motor Replacement

소개

The motor is the most important part of the vacuum as without it, the vacuum cannot create suction. This is a walkthrough on how to replace the motor.

필요한 것

  1. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement, Motor: 1 단계, 이미지 1/1

    • Depress the hose-release tab.

    번역하기

  2. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: 2 단계, 이미지 1/1

    • Next, remove the hose from the connector, near the top of the vacuum's rear. This can be achieved by twisting and then pulling down.

    번역하기

  3. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: 3 단계, 이미지 1/1

    • Use a Phillips #1 screwdriver to remove the two screws on the part holding the hose to the back of the vacuum.

    번역하기

  4. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: 4 단계, 이미지 1/1

    • Use a Phillips #1 screwdriver to remove the two screws that secure the hose-release tab.

    번역하기

  6. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: 5 단계, 이미지 1/1

    • Use a Phillips #1 screwdriver to remove the two screws on the top of the vacuum holding the tab on the left of the vacuum.

    번역하기

  7. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: 6 단계, 이미지 1/2 Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: 6 단계, 이미지 2/2

    • Use a Phillips #1 screwdriver to remove the two screws on the top of the vacuum head holding down the tab on the right.

    • To remove the tab, slide backwards and then pull up. There is a tab holding the piece down so use force if necessary.

    번역하기

  8. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: 7 단계, 이미지 1/2 Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: 7 단계, 이미지 2/2

    • Slide the belt off of the metal rod on the left of the vacuum shaft. Pull the vacuum up and it should easily separate into two pieces.

    번역하기

  9. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: 8 단계, 이미지 1/3 Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: 8 단계, 이미지 2/3 Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: 8 단계, 이미지 3/3

    • Use a Phillips #1 screwdriver to remove the 6 screws on the back and bottom of the vacuum shaft.

    번역하기

  10. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: 9 단계, 이미지 1/1

    • The top of the motor casing should then fold open, revealing the motor.

    번역하기

  11. Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: 10 단계, 이미지 1/2 Hoover T-Series WindTunnel Pet UH30310 Motor Replacement: 10 단계, 이미지 2/2

    • The motor can now be accessed for replacement or repair

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Anthony Garcia

회원 가입일: 01/18/18

223 평판

안내서 1개 작성함

배지: 5

배지 +2개 더

팀

Cal Poly, Team S12-G4, Banghart Winter 2018 Cal Poly, Team S12-G4, Banghart Winter 2018 회원

CPSU-BANGHART-W18S12G4

5 회원들

안내서 9개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 7

전체 시간: 894