기기를 수리하세요 커뮤니티 상점

Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement

소개

Replace your dirty or broken dust cup filter with these easy steps!

필요한 것

  1. Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement, Primary Air Filter: 1 단계, 이미지 1/1

    • Press button on the top of the dust cup and pull back.

    • Remove dust cup from vacuum

    편집

  2. Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement: 2 단계, 이미지 1/1

    • Pull back on black lever and rotate dust cup lid back.

    편집

  4. Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement: 3 단계, 이미지 1/1

    • Lift up on fabric flap to remove filter from vaccum

    • If you wish to clean the filter rather than replace it, it can be washed under a faucet.

    • If washing the filter, make sure it fully dries out before re-installing.

    편집

  5. Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement, Dust Cup Assembly: 4 단계, 이미지 1/1

    • Holding onto both the top handle and dust cup body, twist the two components apart following the instructions printed on the back.

    편집

  6. Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement: 5 단계, 이미지 1/2 Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement: 5 단계, 이미지 2/2

    • Unscrew the three 4 cm Phillips #3 screws located inside the dust filter compartment to detach the dust filter system.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Chino Cruz

회원 가입일: 01/22/18

135 평판

안내서 1개 작성함

배지: 4

+1개 배지 추가

팀

Cal Poly, Team S11-G4, Banghart Winter 2018 Cal Poly, Team S11-G4, Banghart Winter 2018 회원

CPSU-BANGHART-W18S11G4

5 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 13

30일 전: 58

전체 시간: 4,635