주요 콘텐츠로 건너뛰기

Hornby A4 OO Gauge Locomotive Disassembly and Maintenance Replacement

필요한 것

  1. Hornby A4 OO Gauge Locomotive Disassembly and Maintenance Replacement, Setting Loco.: 1 단계, 이미지 1/2 Hornby A4 OO Gauge Locomotive Disassembly and Maintenance Replacement, Setting Loco.: 1 단계, 이미지 2/2
    • Place Locomotive on the padding and gently turn over.

  2. Hornby A4 OO Gauge Locomotive Disassembly and Maintenance Replacement, Removing Brake Rigging.: 2 단계, 이미지 1/3 Hornby A4 OO Gauge Locomotive Disassembly and Maintenance Replacement, Removing Brake Rigging.: 2 단계, 이미지 2/3 Hornby A4 OO Gauge Locomotive Disassembly and Maintenance Replacement, Removing Brake Rigging.: 2 단계, 이미지 3/3
    • Remove brake rigging, and pop off gently.

  3. Hornby A4 OO Gauge Locomotive Disassembly and Maintenance Replacement, Unplugging Connection.: 3 단계, 이미지 1/1
    • Unplug the tender loco connection.

  4. Hornby A4 OO Gauge Locomotive Disassembly and Maintenance Replacement, Removing Drawbar.: 4 단계, 이미지 1/2 Hornby A4 OO Gauge Locomotive Disassembly and Maintenance Replacement, Removing Drawbar.: 4 단계, 이미지 2/2
    • Unscrew two flat head screws on the drawbar.

    • Have a magnet on hand for screws that fall into the loco or onto the floor.

    • 2 flathead screws

  5. Hornby A4 OO Gauge Locomotive Disassembly and Maintenance Replacement, Removing Body.: 5 단계, 이미지 1/3 Hornby A4 OO Gauge Locomotive Disassembly and Maintenance Replacement, Removing Body.: 5 단계, 이미지 2/3 Hornby A4 OO Gauge Locomotive Disassembly and Maintenance Replacement, Removing Body.: 5 단계, 이미지 3/3
    • Unscrew the body using a philips screw driver.

    • Turn over and gently remove the body from the mechanism.

    • Recessed philips head.

  6. Hornby A4 OO Gauge Locomotive Disassembly and Maintenance Replacement, Motor Mount Removal.: 6 단계, 이미지 1/2 Hornby A4 OO Gauge Locomotive Disassembly and Maintenance Replacement, Motor Mount Removal.: 6 단계, 이미지 2/2
    • Remove the motor mount philips screw and remove the gear covering.

    • Philips head screw.

  7. Hornby A4 OO Gauge Locomotive Disassembly and Maintenance Replacement, Worm Gear Greasing.: 7 단계, 이미지 1/2 Hornby A4 OO Gauge Locomotive Disassembly and Maintenance Replacement, Worm Gear Greasing.: 7 단계, 이미지 2/2
    • Add a small amount of grease or oil to the loco.

    • Worm gear.

    • Be careful not to over-lubricate as it may hamper performance.

    • Only use purpose-specific grease or oil.

  8. Hornby A4 OO Gauge Locomotive Disassembly and Maintenance Replacement, Reassembling Body.: 8 단계, 이미지 1/3 Hornby A4 OO Gauge Locomotive Disassembly and Maintenance Replacement, Reassembling Body.: 8 단계, 이미지 2/3 Hornby A4 OO Gauge Locomotive Disassembly and Maintenance Replacement, Reassembling Body.: 8 단계, 이미지 3/3
    • Replace the body onto the loco and turn over gently.

    • Reassemble until step 5.

    • Make sure the body is properly fitted to the locomotive. Pay attention to the lip on the back of the chassis.

  9. Hornby A4 OO Gauge Locomotive Disassembly and Maintenance Replacement, Axle Removal.: 9 단계, 이미지 1/3 Hornby A4 OO Gauge Locomotive Disassembly and Maintenance Replacement, Axle Removal.: 9 단계, 이미지 2/3 Hornby A4 OO Gauge Locomotive Disassembly and Maintenance Replacement, Axle Removal.: 9 단계, 이미지 3/3
    • Move towards the trailing truck of the locomotive and remove screws.

    • Remove philps head screw.

    • Remove the trailing truck plate and remove the axle.

  10. Hornby A4 OO Gauge Locomotive Disassembly and Maintenance Replacement, Greasing Axle.: 10 단계, 이미지 1/3 Hornby A4 OO Gauge Locomotive Disassembly and Maintenance Replacement, Greasing Axle.: 10 단계, 이미지 2/3 Hornby A4 OO Gauge Locomotive Disassembly and Maintenance Replacement, Greasing Axle.: 10 단계, 이미지 3/3
    • Clean, replace and grease.

    • Do not over lubricate.

결론

To reassemble your device, follow these instructions in reverse order.

Landon Edmondson

회원 가입일: 03/31/22

181 평판

안내서 1개 작성함

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 10

전체 시간: 230