물건을 수리하세요 커뮤니티 상점

Hot Wheels AI Intelligent Race System Controller Batteries Replacement

소개

If your Hot Wheels AI controller does not turn, try replacing the battery. This guide will assist you if you have any trouble. Before you begin, you will need three brand new AAA batteries and a J0 screwdriver. The steps should be straightforward and fast! Once you replace your battery, you will be racing in no time!

필요한 것

  1. Hot Wheels AI Intelligent Race System Controller Batteries Replacement, Controller Batteries: 1 단계, 이미지 1개 중 1개

    • Use a JIS #0 screwdriver to unscrew the single battery cover screw.

    편집

  3. Hot Wheels AI Intelligent Race System Controller Batteries Replacement: 2 단계, 이미지 2개 중 1개 Hot Wheels AI Intelligent Race System Controller Batteries Replacement: 2 단계, 이미지 2개 중 2개

    • Remove the old AAA battery from the slot by pressing down on the positive end.

    • Do the same for the other two. Make sure none of the battery slots are damaged.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

2다른 기여자 명과 함께

Peter Nguyen

회원 가입일: 09/07/18

261 평판

안내서 2개를 작성함

배지: 7

배지 +4개 더

팀

Appalachian State University, Team S1-G2, Menagarishvili Fall 2018 Appalachian State University, Team S1-G2, Menagarishvili Fall 2018 회원

APSU-MENAGARISHVILI-F18S1G2

2 회원들

안내서 6개를 작성함

0가이드 댓글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 4

지난 30일: 7

전체 시간: 478