소개

Battery is the major element to provide electricity for hover board. When the battery is damaged, replacing the battery to keep the hover board running.

  1. First, remove both of the top outer cover (left and right side) by unscrewing the twenty screws using the number 1 Philips screwdriver in  iFixit Toolkit's that connect the top and bottom outer cover. First, remove both of the top outer cover (left and right side) by unscrewing the twenty screws using the number 1 Philips screwdriver in  iFixit Toolkit's that connect the top and bottom outer cover. First, remove both of the top outer cover (left and right side) by unscrewing the twenty screws using the number 1 Philips screwdriver in  iFixit Toolkit's that connect the top and bottom outer cover.
    • First, remove both of the top outer cover (left and right side) by unscrewing the twenty screws using the number 1 Philips screwdriver in iFixit Toolkit's that connect the top and bottom outer cover.

  2. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  3. Once removed the outer layer, unscrew all the screws that screwed the cover for the battery (e.g. the one pointed by red arrow in figure 1) using the number 1 Philips screwdriver in the iFixit Toolkit. Once removed the outer layer, unscrew all the screws that screwed the cover for the battery (e.g. the one pointed by red arrow in figure 1) using the number 1 Philips screwdriver in the iFixit Toolkit. Once removed the outer layer, unscrew all the screws that screwed the cover for the battery (e.g. the one pointed by red arrow in figure 1) using the number 1 Philips screwdriver in the iFixit Toolkit.
    • Once removed the outer layer, unscrew all the screws that screwed the cover for the battery (e.g. the one pointed by red arrow in figure 1) using the number 1 Philips screwdriver in the iFixit Toolkit.

  4. After unscrew the screws, move away the plastic cover on the top of the battery. Unplug the cables that connect to the battery  and replace a new battery. After unscrew the screws, move away the plastic cover on the top of the battery. Unplug the cables that connect to the battery  and replace a new battery. After unscrew the screws, move away the plastic cover on the top of the battery. Unplug the cables that connect to the battery  and replace a new battery.
    • After unscrew the screws, move away the plastic cover on the top of the battery. Unplug the cables that connect to the battery and replace a new battery.

결론

To reassemble the device, follow these instructions in reverse order.

Ziru Mo

회원 가입일: 2018년 10월 22일

97 평판

안내서 1개 작성함

UC Davis, Team S7-G2, Lore Fall 2018 UC Davis, Team S7-G2, Lore Fall 2018 회원

UCD-LORE-F18S7G2

3 회원들

안내서 4개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 1

전체 시간: 46