주요 콘텐츠로 건너뛰기

Hover-1 Matrix Pad Replacement

필요한 것

  1. Hover-1 Matrix Pad Replacement, Pad: 1 단계, 이미지 1/2 Hover-1 Matrix Pad Replacement, Pad: 1 단계, 이미지 2/2
    • Remove the screws on the back of the hoverboard using a Phillips #1 screwdriver.

    • Remove the back shell from the hoverboard.

  2. Hover-1 Matrix Pad Replacement: 2 단계, 이미지 1/1
    • Remove the screws from the metal layer inside the hoverboard using a Phillips #1 screwdriver.

  3. Hover-1 Matrix Pad Replacement: 3 단계, 이미지 1/1
    • Separate the upper shell of the hoverboard and the metal layer inside.

  4. Hover-1 Matrix Pad Replacement: 4 단계, 이미지 1/2 Hover-1 Matrix Pad Replacement: 4 단계, 이미지 2/2
    • Start by identifying the motherboard, which is the green pad shown in the picture.

    • Remove the screws on the corners of the motherboard with the Phillips #1 screwdriver and take it off.

    • There are cables attached to the motherboard so go ahead and unattach them.

  5. Hover-1 Matrix Pad Replacement: 5 단계, 이미지 1/3 Hover-1 Matrix Pad Replacement: 5 단계, 이미지 2/3 Hover-1 Matrix Pad Replacement: 5 단계, 이미지 3/3
    • Use picture 1 as a guide and move the motherboard to the other side.

    • Identify the two black rubber buttons that are shown in the second picture.

    • Remove the two rubber buttons using the Phillips #1 screwdriver.

  6. Hover-1 Matrix Pad Replacement: 6 단계, 이미지 1/1
    • Removing the rubber buttons in the previous step allows you to take the pad off.

    • Finally, take off the old pad and put on a new pad.

결론

To reassemble your device, follow these instructions starting with step number 6 and finishing with step number 1.

다른 한 분이 해당 안내서를 완성하였습니다.

Jici Zhuang

회원 가입일: 10/22/18

362 평판

안내서 2개 작성하였습니다

UC Davis, Team S7-G2, Lore Fall 2018 UC Davis, Team S7-G2, Lore Fall 2018 회원

UCD-LORE-F18S7G2

3 회원들

안내서 4개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 5

전체 시간: 331