Skip to main content

소개

The video below details how to wirelessly transfer data from your previous 2DS/3DS systems to the New 3DS XL. If you'd prefer to do a physical transfer, our guide will show you how to manually transfer the data off of your old 2DS/3DS SD card onto the microSD card of the New 3DS XL.

부품

No parts specified.

동영상 개요

  1. Start by removing the stylus from the frame of the New 3DS XL.
    • Start by removing the stylus from the frame of the New 3DS XL.

  2. 아이폰 배터리 수리 키트

    Only $29.99

    Buy Now

    아이폰 배터리 수리 키트

    Only $29.99

    Buy Now
  3. Loosen the two captive Phillips #1 screws on the back of the device. These captive screws will conveniently stay in the rear cover, so don't try to remove them. Prying from the thumb slots on each side, pull the rear panel off the back of the device.
    • Loosen the two captive Phillips #1 screws on the back of the device.

    • These captive screws will conveniently stay in the rear cover, so don't try to remove them.

    • Prying from the thumb slots on each side, pull the rear panel off the back of the device.

  4. Press the microSD card slightly deeper into its slot until you hear a click.
    • Press the microSD card slightly deeper into its slot until you hear a click.

    • After the click, release the card and it will pop out of its slot.

    • Use a PC to copy the data from the source SD card to the New 3DS XL microSD card.

    • You may need a micro SD to SD adapter.

    • For reassembly, push the microSD card into the slot until it clicks in place.

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

Geoff Wacker

회원 가입일: 2013년 09월 30일

76,679 평판

안내서 88개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 6

지난 30일: 42

전체 시간: 2,810