Introduction

This guide will show how to adjust the browning dial in a Black and Decker TR1278B toaster.

  1. Unplug the toaster before disassembly.
    • Unplug the toaster before disassembly.

    • Remove the carriage lever by pulling it away from the toaster.

  2. Toaster will be turned upside down. Clear crumb tray or work over a paper towel.
    • Toaster will be turned upside down. Clear crumb tray or work over a paper towel.

    • Turn the toaster upside down.

    • Unscrew all four 4mm screws on the bottom using a Phillip's head #2 (PH2) screwdriver.

    • Detach the bottom from the front cover using the plastic opening tool.

    • Turn the toaster right side up.

    • Support the bottom. The ribbon cable that connects the toaster to the front cover can be damaged.

    • Lift the front cover.

    • Lift carefully. Again the ribbon cable can be damaged.

    • Detach the bundled cable connector from the toaster by carefully pulling it away from the circuit board.

    • Remove the front cover.

    • Unscrew the circuit behind the browning dial on the front cover.

    • Do not lose the washers on the screws.

    • Remove the circuit.

    • The dial and buttons on the front cover will be loose.

    • Turn the knob on the circuit board left or right to adjust the browning dial.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Dominic Gamonez

Member since: 02/15/2017

209 Reputation

2 Guides authored

Team

USF Tampa, Team 8-1, Eyestone Spring 2017 Member of USF Tampa, Team 8-1, Eyestone Spring 2017

USFT-EYESTONE-S17S8G1

3 Members

5 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 9

All Time: 162