기기를 수리하세요 커뮤니티 상점

How to Change Strings on a Ukulele

필요한 것

  1. How to Change Strings on a Ukulele, String: 1 단계, 이미지 1/1

    • Start by loosening the string you are trying to replace by twisting the pegs.

    • The G and C tuning pegs turn up to tighten and down to loosen while the E and A tuning pegs turn down to tighten and up to loosen.

    편집

  2. How to Change Strings on a Ukulele: 2 단계, 이미지 1/1

    • Next, grab the new string you are using to replace.

    • The packaging will inform you of which string replaces which note—some are different than others so pay attention!

    편집

  3. How to Change Strings on a Ukulele: 3 단계, 이미지 1/1

    • Feed the string through the tie block.

    • Remember to leave slack.

    편집

  5. How to Change Strings on a Ukulele: 4 단계, 이미지 1/1

    • Wrap the string over the tie block and back underneath itself.

    편집

  6. How to Change Strings on a Ukulele: 5 단계, 이미지 1/2 How to Change Strings on a Ukulele: 5 단계, 이미지 2/2

    • Recross the string over itself again, looping it two or three more times.

    편집

  7. How to Change Strings on a Ukulele: 6 단계, 이미지 1/1

    • Pinch the string and pull tightly.

    편집

  8. How to Change Strings on a Ukulele: 7 단계, 이미지 1/1

    • Now, fasten the string back to the headstock. To do this, feed the string through the hole in the turning peg.

    편집

  9. How to Change Strings on a Ukulele: 8 단계, 이미지 1/1

    • Twist again to tighten and cut off extra string once complete.

    편집
결승점

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 1명과 함께

Emily Cunnington

회원 가입일: 09/26/18

211 평판

안내서 1개 작성함

배지: 6

배지 +3개 더

팀

Eastern Washington University, Team S3-G3, Crane Fall 2018 Eastern Washington University, Team S3-G3, Crane Fall 2018 회원

EWU-CRANE-F18S3G3

3 회원들

안내서 3개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 15

전체 시간: 524