주요 콘텐츠로 건너뛰기

소개

Fans on electronic devices collect a lot dust over the years, so this guide will show how to clean the fan on this Toshiba projector in order to prevent overheating. To ensure maximum performance out of a fan, some oil can be added to keep the bearings lubricated and running in tip-top shape.

부품

지정된 부품이 없습니다.

  1. Remove the two screws from the bottom plate as shown. Remove the two screws from the bottom plate as shown.
    • Remove the two screws from the bottom plate as shown.

  2. Remove the two screws on the bulb housing.
    • Remove the two screws on the bulb housing.

  3. Pull the tab up and pull the bulb out vertically. Some force will be required, but it will come out.
    • Pull the tab up and pull the bulb out vertically. Some force will be required, but it will come out.

  4. Using a can of compressed air, blow on the fan until all dust is gone.
    • Using a can of compressed air, blow on the fan until all dust is gone.

    • Oil can be added in with a dropper on the bearing if needed.

결론

To reassemble your device, follow these instructions in reverse order.

Bryan Underwood

회원 가입일: 2018년 04월 02일

697 평판

안내서 5개 작성하였습니다

University of Memphis, Team S1-G3, Kim Spring 2018 University of Memphis, Team S1-G3, Kim Spring 2018 회원

UM-KIM-S18S1G3

3 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 221