How to Detach the Keyboard on a Surface Book

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

소개

Follow this guide to safely disconnect the keyboard base from the display on a Microsoft Surface Book.

The Surface Book’s keyboard base is magnetically attached to the screen and needs to be manually detached if the device can’t power on. Detaching the display from the keyboard base is a helpful prerequisite, making repairs significantly easier.

필요한 것

1 단계 Remove the display with the Detach button

How to Detach the Keyboard on a Surface Book, Remove the display with the Detach button: 1 단계, 이미지 1/3

How to Detach the Keyboard on a Surface Book, Remove the display with the Detach button: 1 단계, 이미지 2/3

How to Detach the Keyboard on a Surface Book, Remove the display with the Detach button: 1 단계, 이미지 3/3

In order for the keyboard to be detached with the Detach buttons, both batteries must be charged above 10 percent. If your device doesn't power on and you can't use the Detach buttons, skip to the next step.
Press and hold the Detach button on the keyboard.
Once pressed, the Detach button it will light up red. After a second, it’ll turn green and you’ll hear an audible clicking sound.
Alternatively, click the Detach icon on the right-hand side of the Windows 10 taskbar.
Remove the display.

번역하기

2 단계 Manually detach the display

How to Detach the Keyboard on a Surface Book, Manually detach the display: 2 단계, 이미지 1/2

How to Detach the Keyboard on a Surface Book, Manually detach the display: 2 단계, 이미지 2/2

The next six steps show how to detach the display manually if you’re unable to power on the Surface Book.
Flip open the display as far as it will go.
Lift the device up and place it on its side, with the display facing away from you and the SurfaceConnect port facing up.

번역하기

3 단계 Bend a paper clip

How to Detach the Keyboard on a Surface Book, Bend a paper clip: 3 단계, 이미지 1/2

How to Detach the Keyboard on a Surface Book, Bend a paper clip: 3 단계, 이미지 2/2

Straighten out one section of a paper clip.

번역하기

4 단계 Push the paper clip into the hole

How to Detach the Keyboard on a Surface Book, Push the paper clip into the hole: 4 단계, 이미지 1/3

How to Detach the Keyboard on a Surface Book, Push the paper clip into the hole: 4 단계, 이미지 2/3

How to Detach the Keyboard on a Surface Book, Push the paper clip into the hole: 4 단계, 이미지 3/3

The Surface Book has an internal lever arm mechanism that can be manually actuated through an access hole in the vents on side of the display.
Insert the straight end of the paper clip at a 45 degree angle into the sixth hole from the left.

번역하기

Siete geniali! Bravissimi! Ggrazie di cuore

Adriano Mezzi - 2024년 3월 2일 답글

5 단계 Release the mechanism

How to Detach the Keyboard on a Surface Book, Release the mechanism: 5 단계, 이미지 1/3

How to Detach the Keyboard on a Surface Book, Release the mechanism: 5 단계, 이미지 2/3

How to Detach the Keyboard on a Surface Book, Release the mechanism: 5 단계, 이미지 3/3

Firmly push the paper clip into the hole.
This may take a considerable amount of force.
Once the internal lever arm is fully depressed, you can disconnect the display.
Pull the base away from the display to detach it.
If you are unable to detach the display from the base on this side, release pressure on the paper clip and try again.

번역하기

You should feel slight resistance when pressing against the internal lever arm. If you don’t feel the resistance after about half an inch, back out and try again. Be careful not to push the paper clip too far, as it can scratch the screen bezel from the inside, leaving a visible mark.

Alexander V Trofimuk - 2021년 8월 6일 답글

This doesn't work on mine... there's a 90° metal support bracket that covers the entire corner (goes up to about the 8-9th hole on the side) and blocks any & all access to the screen release mechanism. After seeing this "solution" online so many times, I never understood how this worked for anyone else...

miked9746 - 2023년 9월 30일 답글

I could detach mine following these instructions. When inserting the paper clip you will feel a resistance like pushing a spring. In my case, pushing the paper clip in about 5 millimeters and holding it when I hear a "click" sound. Be sure to grab the tablet when you see it separating (or have at hand a plastic spudger or opening pick to avoid snapping into place again due to the very strong magnets present).

Andrés Vettori - 2023년 11월 27일 답글

6 단계 Detach the second side

How to Detach the Keyboard on a Surface Book, Detach the second side: 6 단계, 이미지 1/3

How to Detach the Keyboard on a Surface Book, Detach the second side: 6 단계, 이미지 2/3

How to Detach the Keyboard on a Surface Book, Detach the second side: 6 단계, 이미지 3/3

The magnetic connections are prone to snap back into place, so hold the two halves apart.
With one side detached, pull firmly to pivot the display out to disconnect the second side.
If the magnetic connection feels extra strong and the display won't detach on the second side, keep the detached side separated with a spudger, pen, or pencil, and repeat the paper clip process on the other side of the display.