주요 콘텐츠로 건너뛰기

How to Fix a Sticking Deadbolt

필요한 것

  1. How to Fix a Sticking Deadbolt, How to Fix a Sticking Deadbolt: 1 단계, 이미지 1/2 How to Fix a Sticking Deadbolt, How to Fix a Sticking Deadbolt: 1 단계, 이미지 2/2
    • Use a Phillips screwdriver to remove both of the ¾-inch screws from the strike plate.

  2. How to Fix a Sticking Deadbolt: 2 단계, 이미지 1/2 How to Fix a Sticking Deadbolt: 2 단계, 이미지 2/2
    • Remove both of the 2.5 inch mounting screws from the lock cylinder.

  3. How to Fix a Sticking Deadbolt: 3 단계, 이미지 1/1
    • After all four screws have been taken out, slide the latch of the deadbolt out of the door frame.

  4. How to Fix a Sticking Deadbolt: 4 단계, 이미지 1/2 How to Fix a Sticking Deadbolt: 4 단계, 이미지 2/2
    • Spray GumOut parts cleaner at an angle into the latch of the deadbolt.

    • Use a rag to clean and dry off latch.

    • We suggest using GumOut cleaning solutions, which is available at most home improvement stores.

  5. How to Fix a Sticking Deadbolt: 5 단계, 이미지 1/1
    • Spray GumOut parts cleaner into the key cylinder to lubricate chamber.

  6. How to Fix a Sticking Deadbolt: 6 단계, 이미지 1/2 How to Fix a Sticking Deadbolt: 6 단계, 이미지 2/2
    • Insert dry powdered graphite into the key cylinder of the deadbolt.

    • Place the key into the cylinder to lubricate and clean the chamber.

    • If it is difficult to turn the key, then apply more dry powdered graphite into the cylinder.

  7. How to Fix a Sticking Deadbolt: 7 단계, 이미지 1/2 How to Fix a Sticking Deadbolt: 7 단계, 이미지 2/2
    • Apply the dry powdered graphite to the latch of the deadbolt.

    • Use a rag to remove excess dry powdered graphite from the latch.

  8. How to Fix a Sticking Deadbolt: 8 단계, 이미지 1/1
    • Slide the latch of the deadbolt back into the door frame.

  9. How to Fix a Sticking Deadbolt: 9 단계, 이미지 1/3 How to Fix a Sticking Deadbolt: 9 단계, 이미지 2/3 How to Fix a Sticking Deadbolt: 9 단계, 이미지 3/3
    • Take the lock cylinder and the 2.5 inch mounting screws and insert them through the latch of the deadbolt.

    • Then mount the key cylinder on the screws.

    • Use a Phillips screwdriver to tighten the 2.5 inch mounting screws and secure the deadbolt to the frame.

    • The cylinder should be mounted on the outside of the doorframe.

  10. How to Fix a Sticking Deadbolt: 10 단계, 이미지 1/1
    • Use a Phillips screwdriver to screw in both of the ¾-inch screws back into the strike plate.

결론

After following this fast fix guide, the sticking deadbolt should be fixed.

다른 5명이 해당 안내서를 완성하였습니다.

Elizabeth Nesler

회원 가입일: 02/23/16

214 평판

안내서 1개 작성함

Texas Tech, Team 22-5, Rauch Spring 2016 Texas Tech, Team 22-5, Rauch Spring 2016 회원

TTU-RAUCH-S16S22G5

3 회원들

안내서 1개 작성하였습니다

댓글 한 개

GumOut Cleaner seems to be initially intended for Brakes and other auto parts. Is that the product you intend?

dan - 답글

댓글 쓰기

조회 통계:

24 시간 전: 7

7일 전: 35

30일 전: 154

전체 시간: 38,945