How to Install a Hard Drive Sled Adapter for Mac Pro First Generation

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

소개

This guide will walk you through the quick and simple process of assembling a Mac Pro First Generation Hard Drive Sled Adapter. The existing hard drive bay sled brackets in this device are meant to fit 3.5" hard drives, but this adapter enables you to install any SATA 2.5" solid state, hybrid, or standard hard drive. It also correctly aligns the SATA connector to match the socket in your Mac Pro.

필요한 것

1 단계 How to Install a Hard Drive Sled Adapter for Mac Pro First Generation

How to Install a Hard Drive Sled Adapter for Mac Pro First Generation, How to Install a Hard Drive Sled Adapter for Mac Pro First Generation: 1 단계, 이미지 1/3

Insert the two tabs on the left side of the metal adapter bracket into the slots on the left side of the hard drive bay sled.
Align the holes on the right side.

번역하기

2 단계

Screw the two 7.8mm PH0 screws into the two holes on the right.
Leave these screws slightly loose; they will be tightened once the hard drive is attached.

번역하기