기기를 수리하세요 커뮤니티 상점

How to Position a Vernier Caliper

소개

These instructions will cover the techniques for measuring external & internal features, as well as heights and depths.

필요한 것

  1. How to Position a Vernier Caliper, Good Practice: 1 단계, 이미지 1/2 How to Position a Vernier Caliper, Good Practice: 1 단계, 이미지 2/2

    • Use the metal wheel contacting the measured surfaces.

    • This will allow for a more repeatable measurement.

    • Extend the calibration life of the device. Preventing damage to the measuring surfaces or measured part.

    • Make use of the locking mechanism.

    • Occasionally the device has to be positioned in a way that cannot be read.

    • Always prioritize comfort. If there is a change the jaws can move when attempting to read. Lock the device. Move it to you.

    • Ensure the part is secure, use flat surfaces, try to use the vernier comfortably with both hands.

    편집

  2. How to Position a Vernier Caliper, External Feature: 2 단계, 이미지 1/3 How to Position a Vernier Caliper, External Feature: 2 단계, 이미지 2/3 How to Position a Vernier Caliper, External Feature: 2 단계, 이미지 3/3

    • External features are measured as shown.

    • These sections of the jaws have a knife edge,

    • Used to measure smaller features with low clearances.

    • These sections have a flat edge.

    • Used to measure larger features with perpendicular surfaces.

    편집

  4. How to Position a Vernier Caliper, Internal Feature: 3 단계, 이미지 1/1

    • Internal features are measured as shown.

    편집

  5. How to Position a Vernier Caliper, Height: 4 단계, 이미지 1/3 How to Position a Vernier Caliper, Height: 4 단계, 이미지 2/3 How to Position a Vernier Caliper, Height: 4 단계, 이미지 3/3

    • Heights of steps are measured as shown.

    • Butt the head of the caliper against one surface.

    • Butt the head of the slider against the other surface.

    편집

  6. How to Position a Vernier Caliper, Depth: 5 단계, 이미지 1/2 How to Position a Vernier Caliper, Depth: 5 단계, 이미지 2/2

    • Depth of holes are measured as shown.

    • Position the blade to the center of the hole.

    • Hold the end of the caliper flush the surface of the hole.

    • Extend the slider until the blade bottoms out the hole.

    편집
결론

Happy Measuring

다른 5명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 1명과 함께

James Schreiber

회원 가입일: 07/01/17

254 평판

안내서 1개 작성함

배지: 6

배지 +3개 더

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 16

전체 시간: 1,533