주요 콘텐츠로 건너뛰기

How to Re-caulk a Bathroom

보관된 가이드
해당 안내서는 단지 역사적인 목적으로 보관됩니다. 최신 버전 안내서를 사용하여 수리 하십시오.

필요한 것

  1. How to Re-caulk a Bathroom, How to Re-caulk a Bathroom: 1 단계, 이미지 1/1
    • Use a knife to uproot the old caulk that is sealed to the wall.

  2. How to Re-caulk a Bathroom: 2 단계, 이미지 1/1
    • Peel off until all of the caulk is removed.

  3. How to Re-caulk a Bathroom: 3 단계, 이미지 1/1
    • Remove all of the residual caulk that lies under the main slabs that were just pulled off.

    • Do this by angling the tip of the blade into the pivot and scraping up the caulk that lies there.

  4. How to Re-caulk a Bathroom: 4 단계, 이미지 1/3 How to Re-caulk a Bathroom: 4 단계, 이미지 2/3 How to Re-caulk a Bathroom: 4 단계, 이미지 3/3
    • Before applying the new caulk, clean the area with hydrogen peroxide or rubbing alcohol.

    • Let the area dry for about 10 minutes before applying the new caulk. This will allow the new caulk to seal properly.

  5. How to Re-caulk a Bathroom: 5 단계, 이미지 1/2 How to Re-caulk a Bathroom: 5 단계, 이미지 2/2
    • Place the tip of the new bottle of caulk into the hole by the trigger.

    • Squeeze the trigger to cut.

  6. How to Re-caulk a Bathroom: 6 단계, 이미지 1/2 How to Re-caulk a Bathroom: 6 단계, 이미지 2/2
    • Use something sharp to break the inner seal of the caulk.

    • The use of the pin on the caulking gun (as shown in the 2nd picture) is an alternative to using a blade.

  7. How to Re-caulk a Bathroom: 7 단계, 이미지 1/2 How to Re-caulk a Bathroom: 7 단계, 이미지 2/2
    • Push the silver button and pull the spring back to fully open the chamber of the caulking gun.

    • Place the new bottle of caulk into the open chamber.

  8. How to Re-caulk a Bathroom: 8 단계, 이미지 1/2 How to Re-caulk a Bathroom: 8 단계, 이미지 2/2
    • To apply the new caulk, press the trigger and drag the gun across the area being re-caulked.

    • When caulking the area, try to use the appropriate amount of caulk. More is better than less.

  9. How to Re-caulk a Bathroom: 9 단계, 이미지 1/3 How to Re-caulk a Bathroom: 9 단계, 이미지 2/3 How to Re-caulk a Bathroom: 9 단계, 이미지 3/3
    • After applying the new caulk, dab a finger in water and smooth it out.

    • The more times you smooth it out, the more caulk you take off. This is why using more is better than using less.

    • It takes 24 hours for new caulking to dry. DO NOT get the surface wet during this time. It will ruin your work.

결론

By using these tools and referring to this guide, you can re-caulk any part of your bathroom with relative ease.

다른 5명이 해당 안내서를 완성하였습니다.

Nicholas Khorshidi

회원 가입일: 09/29/15

353 평판

안내서 1개 작성함

Cal Poly, Team 10-2, Green Fall 2015 Cal Poly, Team 10-2, Green Fall 2015 회원

CPSU-GREEN-F15S10G2

3 회원들

안내서 3개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 523