기기를 수리하세요 커뮤니티 상점

How to Repair a Bra Underwire

소개

This step by step guide demonstrates the repair of a bra's underwire poking through the underside of the cup.

필요한 것

  1. How to Repair a Bra Underwire, How to Repair a Bra Underwire: 1 단계, 이미지 1/1

    • Locate the problem: find where the underwire breaks through the fabric of the bra.

    편집

  2. How to Repair a Bra Underwire: 2 단계, 이미지 1/2 How to Repair a Bra Underwire: 2 단계, 이미지 2/2

    • Push the underwire back into the fabric of the side of the cup.

    • When back in place, the wire should not be visible.

    편집

  3. How to Repair a Bra Underwire: 3 단계, 이미지 1/1

    • Take a piece of matching scrap fabric and cut to the appropriate size.

    • Make sure the fabric is a bit bigger than the wire's puncture hole.

    • If the fabric is too thin, you can fold it to create a thicker piece.

    편집

  5. How to Repair a Bra Underwire: 4 단계, 이미지 1/3 How to Repair a Bra Underwire: 4 단계, 이미지 2/3 How to Repair a Bra Underwire: 4 단계, 이미지 3/3

    • Measure the appropriate length of thread and cut it.

    • Thread the needle and pull both ends evenly to double up the thread.

    • Tie the two loose ends of the thread together with a simple knot.

    편집

  6. How to Repair a Bra Underwire: 5 단계, 이미지 1/2 How to Repair a Bra Underwire: 5 단계, 이미지 2/2

    • Place the fabric over the hole. Sew along the perimeter of the fabric square with a simple overlock stitch.

    • An overlock stitch is a sewing technique where the edges of one or more pieces of fabric are sewn together. Watch a short video to learn how to sew the overlock stitch by hand.

    • Make sure to sew through only the patch fabric and the bra's inner fabric layer. The thread should not show at the front of the bra!

    편집

  7. How to Repair a Bra Underwire: 6 단계, 이미지 1/3 How to Repair a Bra Underwire: 6 단계, 이미지 2/3 How to Repair a Bra Underwire: 6 단계, 이미지 3/3

    • In the last stitch, leave a loop of tread and pull the needle through the loop.

    • Finish by tying a knot in the end of the tread.

    • Cut the excess thread close to the fabric.

    • Do not cut the thread too close to the knot. This will make the stitches unravel.

    편집

  8. How to Repair a Bra Underwire: 7 단계, 이미지 1/2 How to Repair a Bra Underwire: 7 단계, 이미지 2/2

    • Cut the excess fabric off the finished patch.

    • Inspect the patch to make sure it is securely sewed on the bra.

    • The final product should be a small patch on the inside of the cup.

    편집

  9. How to Repair a Bra Underwire: 8 단계, 이미지 1/1

    • No damage or evidence of sewing is shown on the outside of the bra.

    • Try on the final product to ensure correct fit and comfort.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 5명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

Celeste Stoker

회원 가입일: 04/28/17

213 평판

안내서 1개 작성함

배지: 6

배지 +3개 더

팀

UC Davis, Team S4-G2, Cole Spring 2017 UC Davis, Team S4-G2, Cole Spring 2017 회원

UCD-COLE-S17S4G2

3 회원들

안내서 1개 작성하였습니다

댓글 2개

You made something that is a total pain in the #$@ not so painful anymore and thanks for adding the video cause that helped a lot

Willow Reignes - 답글

I agree with Wllow. Thank you on behalf of my wife and wallet.

Daniel Pollard - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 11

30일 전: 51

전체 시간: 8,575