주요 콘텐츠로 건너뛰기

소개

This fix will restore your fan's original power and quiet operation. This fix does not require new parts, but does require a #1 Phillips head screwdriver, an 8mm wrench or socket, and a medium or low viscosity lubricant.

도구

부품

지정된 부품이 없습니다.

  1. How to Repair a Portable Fan, How to Repair a Portable Fan: step 1, image 1 of 2 How to Repair a Portable Fan, How to Repair a Portable Fan: step 1, image 2 of 2
    • Unplug the power cord before beginning.

    • Loosen the 4 phillips screws around the rim and remove the front of the cage

  2. How to Repair a Portable Fan: step 2, image 1 of 1
    • Remove the fan blade by loosening the screw on the shaft while pulling up.

    • The screw does not need to be fully removed before the blade will slide free.

  3. How to Repair a Portable Fan: step 3, image 1 of 1
    • Remove the wiring cover located above the fan motor.

    • There are 2 more screws holding the back mounting plate and cage together. They will be removed in a later step

  4. How to Repair a Portable Fan: step 4, image 1 of 1
    • Remove the motor from the mounting plate by loosing the 2 smaller screws on the front.

  5. How to Repair a Portable Fan: step 5, image 1 of 1
    • Remove the final 2 screws holding the mounting plate to the cage.

  6. How to Repair a Portable Fan: step 6, image 1 of 1
    • Carefully pass the motor through the opening at the back of the cage.

  7. How to Repair a Portable Fan: step 7, image 1 of 2 How to Repair a Portable Fan: step 7, image 2 of 2
    • Using an 8mm wrench and phillips screwdriver, remove the magnet mounts from the body of the motor.

    • The magnet will slide out of the motor . Inspect the magnet and motor for anything that may cause a hang-up.

    • Do not over-tighten the magnet mounts during reassembly. Over-tightening may cause the motor to bind.

  8. How to Repair a Portable Fan: step 8, image 1 of 2 How to Repair a Portable Fan: step 8, image 2 of 2
    • Clean and lubricate the magnet shaft and mounting brackets

    • Any medium or low viscosity lubricant will do.

결론

To reassemble your device, follow these steps in reverse order.

다른 4명이 해당 안내서를 완성하였습니다.

Isaac MacMillan

회원 가입일: 2017년 10월 02일

185 평판

안내서 1개 작성함

Michigan Tech, Team S5-G11, Galliah Fall 2017 Michigan Tech, Team S5-G11, Galliah Fall 2017 회원

MTU-GALLIAH-F17S5G11

2 회원들

안내서 2개 작성하였습니다

댓글 3개

What are the chances the exact fan that I need to repair would be here? I'm about to put it back together… Let's see if it worked! 9/3/19, 10:45 pm.

Clark Nova - 답글

OK. It's back together but the fan doesn't spin. I feel the motor doing… Something. It vibrates softly. So, now to figure out why it's not spinning.

Clark Nova - 답글

hello…my fan wouldn't work until I tilt the head upwards..what could be wrong pls???

adewale ogunbona - 답글

댓글 쓰기

조회 통계:

24 시간 전: 17

7일 전: 134

30일 전: 655

전체 시간: 10,185