메인 콘텐츠로 스킵하기

소개

Over time, the velcro that secures a baseball cap can collect dust and lint that renders itself useless and unable to bond. Instead of discarding the cap, you can a replace the worn out velcro by sewing a new piece of velcro onto the strap. For this fast fix, you will need to know how to sew using simple stitches.

  1. Use a seam ripper to remove the stitching between the velcro and the hat. Make sure to fully remove the velcro by also seam ripping the fold inside the hat. Repeat this step on the other strap.
    • Use a seam ripper to remove the stitching between the velcro and the hat.

    • Make sure to fully remove the velcro by also seam ripping the fold inside the hat.

    • Repeat this step on the other strap.

  2. Use a measuring tape to measure how much velcro you will need. Use a measuring tape to measure how much velcro you will need.
    • Use a measuring tape to measure how much velcro you will need.

  3. Cut the precise amount of velcro to be sewn onto the hat.
    • Cut the precise amount of velcro to be sewn onto the hat.

  4. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  5. Pin the new velcro onto the hat.
    • Pin the new velcro onto the hat.

    • This will make sure both pieces stay in place when you start to sew the velcro in place.

  6. To prepare for sewing, thread the needle with a thread color of your choice. Pull the thread through the loop. Measure about 24 inches
    • To prepare for sewing, thread the needle with a thread color of your choice.

    • Pull the thread through the loop.

    • Measure about 24 inches

    • Make sure to leave an even amount of thread on either side of the needle.

    • 12 inches on each side

    • Cut the thread.

    • Knot the ends of the thread together to secure.

  7. Use a running stitch to secure the velcro to the strap of the cap. To do a running stitch: bring the needle up through the cap side of the strap and then the velcro until the knot at the end of the thread hits the fabric. At this point, bring the needle back down through the velcro a few millimeters from where you started, following the direction you're trying to sew.
    • Use a running stitch to secure the velcro to the strap of the cap.

    • To do a running stitch: bring the needle up through the cap side of the strap and then the velcro until the knot at the end of the thread hits the fabric.

    • At this point, bring the needle back down through the velcro a few millimeters from where you started, following the direction you're trying to sew.

    • Keep bringing the needle up and down through the strap and velcro, moving the same distance each time. Repeat this until you have sewn around the entire piece of velcro to secure it.

  8. When you come to the end, knot the thread next to the last running stitch to finish it.
    • When you come to the end, knot the thread next to the last running stitch to finish it.

  9. Repeat steps 4 - 7 on the remaining strap using the other side of the velcro.
    • Repeat steps 4 - 7 on the remaining strap using the other side of the velcro.

    • Once finished, the velcro should be securely sewn on the baseball cap and ready to use.

결승점

Vi Truong

회원 가입일: 2018년 10월 26일

165 평판

안내서 1개 작성함

UC Davis, Team S1-G9, Bender Fall 2018 UC Davis, Team S1-G9, Bender Fall 2018 회원

UCD-BENDER-F18S1G9

3 회원들

안내서 1개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 14

지난 7일: 60

지난 30일: 188

전체 시간: 820