주요 콘텐츠로 건너뛰기

How to Replace a Watch Strap

필요한 것

  1. How to Replace a Watch Strap, Watch Strap: 1 단계, 이미지 1/1
    • Begin by laying a soft towel or fabric on a table.

    • This will prevent accidental scratches during the repair.

    • We will be performing all repairs from the back of the watch, to avoid scratching the visible watch face.

  2. How to Replace a Watch Strap: 2 단계, 이미지 1/2 How to Replace a Watch Strap: 2 단계, 이미지 2/2
    • Before you begin, consider practicing with your tool to compress the bar.

    • Hold the watch with the face in your palm, with one end of the strap free to move.

  3. How to Replace a Watch Strap: 3 단계, 이미지 1/2 How to Replace a Watch Strap: 3 단계, 이미지 2/2
    • Insert your Spring Bar tool into the gap between the end of the watch strap and the watch body.

    • Press down and compress the spring. By pushing the bar away from the body, one end of the spring bar should come loose.

  4. How to Replace a Watch Strap: 4 단계, 이미지 1/2 How to Replace a Watch Strap: 4 단계, 이미지 2/2
    • Being cautious as to not damage the body or spring bar, slide the bar out from its hole and remove the strap.

    • Set this half of the strap with the spring bar aside until we remove the other strap.

  5. How to Replace a Watch Strap: 5 단계, 이미지 1/3 How to Replace a Watch Strap: 5 단계, 이미지 2/3 How to Replace a Watch Strap: 5 단계, 이미지 3/3
    • Repeat steps 2-4 to remove the other end of the watch strap.

  6. How to Replace a Watch Strap: 6 단계, 이미지 1/3 How to Replace a Watch Strap: 6 단계, 이미지 2/3 How to Replace a Watch Strap: 6 단계, 이미지 3/3
    • Replace the old or damaged watch straps by simply sliding the spring bars out and into the new straps

    • Be careful not to put the new straps on the wrong side of the body.

  7. How to Replace a Watch Strap: 7 단계, 이미지 1/3 How to Replace a Watch Strap: 7 단계, 이미지 2/3 How to Replace a Watch Strap: 7 단계, 이미지 3/3
    • Begin the reassembly by sliding the bottom of the spring bar into its hole on the watch body.

    • Remember, always work from the back of the watch to prevent visible scratches.

    • Using your spring bar tool, compress the bar and slide back into place.

    • The spring bar should click when installed correctly.

  8. How to Replace a Watch Strap: 8 단계, 이미지 1/3 How to Replace a Watch Strap: 8 단계, 이미지 2/3 How to Replace a Watch Strap: 8 단계, 이미지 3/3
    • Repeat step 7 on the other side of the watch.

    • Give the watch a tug to make sure all parts are installed correctly.

결론

You have completed the fix! We hope this guide has helped.

다른 5명이 해당 안내서를 완성하였습니다.

domenicruffino

회원 가입일: 09/29/15

281 평판

안내서 1개 작성함

Cal Poly, Team 14-2, Green Fall 2015 Cal Poly, Team 14-2, Green Fall 2015 회원

CPSU-GREEN-F15S14G2

4 회원들

안내서 8개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 13

30일 전: 54

전체 시간: 10,515