주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

The purpose of this technical description is to explore the Utilitech SFC1-500B 20” High Velocity Floor Fan at the system-level, then discuss the important parts directly related to using the device. This description will give the user a basic idea of fan’s design and operation so as to become more proficient in its use.

  1. Unplug fan prior to repair.
    • Unplug fan prior to repair.

    • Remove the Phillips #2 screws securing the fan cover.

  2. Remove the fan cover.
    • Remove the fan cover.

  3. Remove the screws holding the plastic wire cover with a Phillips #2 screwdriver and flexible extension.
    • Remove the screws holding the plastic wire cover with a Phillips #2 screwdriver and flexible extension.

    • If the above attachment is unavailable, use a crescent wrench or pliers to grip the screwdriver for additional torque.

  4. 필수 도구 키트

    최고의 소형 키트에서 가장 유용한 도구.

    지금 쇼핑하기

    필수 도구 키트

    최고의 소형 키트에서 가장 유용한 도구.

    지금 쇼핑하기
  5. Remove the green wire that is attached to the motor housing.
    • Remove the green wire that is attached to the motor housing.

  6. Remove the nuts securing the motor to the back cover of the fan, using a Phillips #2 screwdriver and an 8mm socket driver.
    • Remove the nuts securing the motor to the back cover of the fan, using a Phillips #2 screwdriver and an 8mm socket driver.

  7. Remove the power cord from the back cover by sliding the wire off of the two metal rails holding them together.
    • Remove the power cord from the back cover by sliding the wire off of the two metal rails holding them together.

  8. Remove the motor from the back of the fan cover.
    • Remove the motor from the back of the fan cover.

  9. The fan is fully disassembled; replace the damaged parts.
    • The fan is fully disassembled; replace the damaged parts.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

EngineeringCorpsman

회원 가입일: 2015년 06월 24일

157 평판

안내서 1개 작성함

Colorado Springs, Team 1-4, Mcmichael SU 2015 Colorado Springs, Team 1-4, Mcmichael SU 2015 회원

UCCS-MCMICHAEL-SU15S1G4

2 회원들

안내서 1개 작성하였습니다

do you have the wiring schematics for this fan my wire broke from the copper coil thank you

Timothy Thomas - 답글

My Ulitiech fan suddenly stopped working. What can I do to get it to work again. Or is it my new door stop?

Belinda Blodgett - 답글

Where can I find replacement blades for this fan?

Jason - 답글

My cord on my utilitech floor fan was severed by my table saw and I’ve spliced the cord and it still won’t work. Could there be a reset button or something I’m missing?

Steve Case - 답글

댓글 쓰기

조회 통계:

24 시간 전: 3

7일 전: 14

30일 전: 81

전체 시간: 5,508