기기를 수리하세요 커뮤니티 상점

How to Restore Contact Point Electrodes

소개

Reshaping the contact point electrodes which hold bObi's dustbin in place can resolve installation and bin latching difficulties.

필요한 것

  1. How to Restore Contact Point Electrodes, How to Restore Contact Point Electrodes: 1 단계, 이미지 1/3 How to Restore Contact Point Electrodes, How to Restore Contact Point Electrodes: 1 단계, 이미지 2/3 How to Restore Contact Point Electrodes, How to Restore Contact Point Electrodes: 1 단계, 이미지 3/3

    • Remove bObi's dustbin:

    • Push down on the button found on bObi's back to release the dustbin.

    편집

  3. How to Restore Contact Point Electrodes: 2 단계, 이미지 1/3 How to Restore Contact Point Electrodes: 2 단계, 이미지 2/3 How to Restore Contact Point Electrodes: 2 단계, 이미지 3/3

    • Inside bObi are two contact point electrodes, secured with a small red fastener and two screws.

    • Use a screwdriver to reach underneath the electrodes and pull upward gently to bend them back to the correct shape.

    편집

  4. How to Restore Contact Point Electrodes: 3 단계, 이미지 1/2 How to Restore Contact Point Electrodes: 3 단계, 이미지 2/2

    • When the electrodes are fixed, slide the dustbin back into bObi. The HEPA filter side of the dustbin should face down.

    • Ensure it locks in place, and the contact point electrodes will line up correctly, so bObi can resume functioning.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Chelsea

회원 가입일: 09/24/14

2,278 평판

안내서 31개 작성하였습니다

배지: 11

배지 +8개 더

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 291