기기를 수리하세요 커뮤니티 상점

How to Wind a Bobbin on a Brother LX3817 Sewing Machine

소개

This guide will demonstrate how to wind a bobbin using a Brother LX3817 sewing machine.

Respooling a bobbin is easy with the Brother LX3817 Sewing Machine. This guide requires a plastic spool to rethread and scissors to cut excess thread between steps.

In the process of respooling, you will be working with a sewing needle attached to the machine. This needle is sharp and may cause injuries if not handled properly. Be sure to pay close attention to each step to ensure the best accuracy and least resistance is implemented.

필요한 것

  1. How to Wind a Bobbin on a Brother LX3817 Sewing Machine, How to Wind a Bobbin on a Brother LX3817 Sewing Machine: 1 단계, 이미지 1/2 How to Wind a Bobbin on a Brother LX3817 Sewing Machine, How to Wind a Bobbin on a Brother LX3817 Sewing Machine: 1 단계, 이미지 2/2

    • Pull up the spool pin.

    편집

  2. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: 2 단계, 이미지 1/1

    • Place the spool of thread on the spool pin.

    편집

  3. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: 3 단계, 이미지 1/2 How to Wind a Bobbin on a Brother LX3817 Sewing Machine: 3 단계, 이미지 2/2

    • Pull the thread through the hoop.

    편집

  4. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: 4 단계, 이미지 1/2 How to Wind a Bobbin on a Brother LX3817 Sewing Machine: 4 단계, 이미지 2/2

    • Align the spool notch to the projection by moving it to the left.

    편집

  5. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: 5 단계, 이미지 1/1

    • Insert an empty bobbin spool onto the spool notch.

    편집

  7. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: 6 단계, 이미지 1/1

    • Sew the thread through the top hole.

    • Leave 1 inch of thread from the top hole on the bobbin.

    편집

  8. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: 7 단계, 이미지 1/1

    • Cut the excess thread past the 1 inch mark.

    편집

  9. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: 8 단계, 이미지 1/1

    • Push the bobbin winder to the right.

    편집

  10. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: 9 단계, 이미지 1/1

    • Loop the string around the bobbin.

    편집

  11. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: 10 단계, 이미지 1/3 How to Wind a Bobbin on a Brother LX3817 Sewing Machine: 10 단계, 이미지 2/3 How to Wind a Bobbin on a Brother LX3817 Sewing Machine: 10 단계, 이미지 3/3

    • Turn on the power button of the machine.

    • 0 means off and 1 means on.

    편집

  12. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: 11 단계, 이미지 1/2 How to Wind a Bobbin on a Brother LX3817 Sewing Machine: 11 단계, 이미지 2/2

    • Press down on the foot pedal.

    편집

  13. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: 12 단계, 이미지 1/2 How to Wind a Bobbin on a Brother LX3817 Sewing Machine: 12 단계, 이미지 2/2

    • Lift your foot off of the pedal to stop winding.

    편집

  14. How to Wind a Bobbin on a Brother LX3817 Sewing Machine: 13 단계, 이미지 1/1

    • Cut excess thread.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Justin Barren

회원 가입일: 02/21/23

217 평판

안내서 1개 작성함

배지: 3

팀

University of North Texas, Team 2-14, Raign Spring 2023 University of North Texas, Team 2-14, Raign Spring 2023 회원

UNT-RAIGN-S23S2G14

3 회원들

안내서 1개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 10

30일 전: 56

전체 시간: 620