부품

부품은 필요하지 않습니다.

  1. Open the tray by pressing the eject button
    • Open the tray by pressing the eject button

    • Remove the DVD tray faceplate by pushing the faceplate up off of the tray.

    댓글 쓰기

  2. Press the eject button to insert the tray
    • Press the eject button to insert the tray

    • After the tray is closed unplug DVD player

    댓글 쓰기

    • Unscrew the 3 screws in the back.

    댓글 쓰기

    • Pull the outer case upward and then towards you.

    댓글 쓰기

  3. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    • There are six symmetrically placed tabs holding in the front faceplate. Unhook these six tabs to loosen the faceplate.

    댓글 쓰기

    • Pull off front faceplate. This may take a couple of tries to get all six tabs unhooked simultaneously.

    댓글 쓰기

    • Locate the white clip that attaches the cord to the motherboard

    • Grasp clip and squeeze to release

    • Lift up and remove power cord

    • Slide cord mount from outer case

    댓글 쓰기

    • Remove the three screws holding in the DVD tray

    댓글 쓰기

    • Remove the power cord and first two ribbons by pulling them directly out of their sockets.

    댓글 쓰기

    • Gently lift the DVD tray off of the motherboard.

    댓글 쓰기

    • Use the tweezers to make sure all the buttons aren't stuck.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Mitchell Hart

회원 가입일: 2011년 01월 21일

819 평판

안내서 5개 작성하였습니다

Cal Poly, Team 3-30, Regan Winter 2011 Cal Poly, Team 3-30, Regan Winter 2011 회원

CPSU-REGAN-W11S3G30

4 회원들

안내서 8개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 2

지난 30일: 7

전체 시간: 1,238