Skip to main content

소개

A cracked or dirty cover shield can be the cause of many recording problems for the Sony ECM-MS907 microphone. This guide will go over a short examination of the cover shield.

부품

지정된 부품이 없습니다.

  1. Using the Phillips head (#00) screwdriver, remove the two screws at the bottom base of the diaphragm.
    • Using the Phillips head (#00) screwdriver, remove the two screws at the bottom base of the diaphragm.

  2. Separate the top outer cover from the bottom base of the microphone to reveal the cover shield.
    • Separate the top outer cover from the bottom base of the microphone to reveal the cover shield.

  3. 안드로이드 수리 키트

    새 스크린 혹은 배터리는 단 하나의 키트로 충분합니다.

    지금 장보기

    안드로이드 수리 키트

    새 스크린 혹은 배터리는 단 하나의 키트로 충분합니다.

    지금 장보기
  4. Underneath the top outer cover is the partially welded cover shield, which protects the inner receiver of the microphone from dust. Examine the cover shield thoroughly for any dirt or cracks.
    • Underneath the top outer cover is the partially welded cover shield, which protects the inner receiver of the microphone from dust.

    • Examine the cover shield thoroughly for any dirt or cracks.

  5. Take a quick look at the top of the inner receiver for any excess dirt.
    • Take a quick look at the top of the inner receiver for any excess dirt.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Kefaya

회원 가입일: 2014년 01월 23일

343 Reputation

안내서 3개 작성하였습니다

New Mexico State, Team 1-2, Sheppard Spring 2014 New Mexico State, Team 1-2, Sheppard Spring 2014 회원

NMSU-SHEPPARD-S14S1G2

3 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 5

All Time: 454