기기를 수리하세요 커뮤니티 상점

How to clean and maintain your Vape Mod

소개

This guide will teach you how to take apart your Vape Mod completely, analyze which parts need to be cleaned, and how to correctly clean them.

필요한 것

  1. How to clean and maintain your Vape Mod, How to clean and maintain your Vape Mod: 1 단계, 이미지 1/3 How to clean and maintain your Vape Mod, How to clean and maintain your Vape Mod: 1 단계, 이미지 2/3 How to clean and maintain your Vape Mod, How to clean and maintain your Vape Mod: 1 단계, 이미지 3/3

    • Although maintenance for your Vape Mod shouldn't be dangerous, it can be messy. It is recommended to do this on top of a paper towel.

    • Start by removing the top cap of your Vape Mod.

    편집

  2. How to clean and maintain your Vape Mod: 2 단계, 이미지 1/3 How to clean and maintain your Vape Mod: 2 단계, 이미지 2/3 How to clean and maintain your Vape Mod: 2 단계, 이미지 3/3

    • Unscrew RDA (rebuildable dripping atomizer) and take it off.

    편집

  3. How to clean and maintain your Vape Mod: 3 단계, 이미지 1/3 How to clean and maintain your Vape Mod: 3 단계, 이미지 2/3 How to clean and maintain your Vape Mod: 3 단계, 이미지 3/3

    • Many Vape Mods are different, you might have to take out your battery in a different way than shown.

    • At the bottom of the tube, unscrew the firing pin.

    • Take the battery out of the Vape Mod.

    편집

  5. How to clean and maintain your Vape Mod: 4 단계, 이미지 1/3 How to clean and maintain your Vape Mod: 4 단계, 이미지 2/3 How to clean and maintain your Vape Mod: 4 단계, 이미지 3/3

    • Inspect all of the parts that will need to be cleaned:

    • The firing pin

    • The RDA threading

    • The bottom of the inside of the tube

    편집

  6. How to clean and maintain your Vape Mod: 5 단계, 이미지 1/2 How to clean and maintain your Vape Mod: 5 단계, 이미지 2/2

    • Clean the Firing pin by dipping a paper towel into hot water.

    • Carefully rotate the hot towel around the middle area, rubbing the grime away.

    편집

  7. How to clean and maintain your Vape Mod: 6 단계, 이미지 1/3 How to clean and maintain your Vape Mod: 6 단계, 이미지 2/3 How to clean and maintain your Vape Mod: 6 단계, 이미지 3/3

    • Get a new paper towel wet with the hot water.

    • Clean the RDA threading by rotating the wet paper towel back and forth across it.

    편집

  8. How to clean and maintain your Vape Mod: 7 단계, 이미지 1/3 How to clean and maintain your Vape Mod: 7 단계, 이미지 2/3 How to clean and maintain your Vape Mod: 7 단계, 이미지 3/3

    • Get a new paper towel wet with the hot water.

    • Twist it until it can easily fit inside of the tube.

    • Use your finger or another long tool to rotate the paper towel along the sides and the bottom of the tube.

    편집

  9. How to clean and maintain your Vape Mod: 8 단계, 이미지 1/3 How to clean and maintain your Vape Mod: 8 단계, 이미지 2/3 How to clean and maintain your Vape Mod: 8 단계, 이미지 3/3

    • Put your Vape Mod back together by doing steps 1 - 2 in reverse. (Leave the mouthpiece of the top cap off).

    • Careful, firing your Vape Mod produces heat and can make the device HOT!

    • Fire your Vape Mod. If the coils are heating up, it has been fixed!

    편집
결론

If your Vape Mod is still not firing, consider getting a new build.

다른 13명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Jessie Smith

회원 가입일: 09/29/15

677 평판

안내서 1개 작성함

배지: 7

배지 +4개 더

팀

Cal Poly, Team 14-3, Green Fall 2015 Cal Poly, Team 14-3, Green Fall 2015 회원

CPSU-GREEN-F15S14G3

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 3

7일 전: 8

30일 전: 31

전체 시간: 10,614