기기를 수리하세요 커뮤니티 상점

How to clean/replace buttons on the Skytex SP728

소개

This guide will show how to remove the back cover of the Skytex SP728 and identify the buttons on the side of the device. These buttons are used to raise or lower the volume and to power the device on or off.

필요한 것

  1. How to clean/replace buttons on the Skytex SP728, Case: 1 단계, 이미지 1/1

    • Make sure the device is powered off

    • Rotate the device so the ports and screws face you

    번역하기

  2. How to clean/replace buttons on the Skytex SP728: 2 단계, 이미지 1/1

    • Using a small phillips screwdriver, unscrew both end screws

    번역하기

  4. How to clean/replace buttons on the Skytex SP728: 3 단계, 이미지 1/1

    • Using a plastic opening tool, work your way around the edge of the device, separating the case from the rest of the device

    번역하기

  5. How to clean/replace buttons on the Skytex SP728: 4 단계, 이미지 1/1

    • Once the case has been loosened, pry the backing off gently with your hands.

    • Make sure to remove the case gently as extra force can break the clasps or the case itself.

    번역하기

  6. How to clean/replace buttons on the Skytex SP728, How to clean/replace buttons on the Skytex SP728: 5 단계, 이미지 1/1

    • Remove the black buttons (they should not be directly attached to the device and may fall out).

    번역하기

  7. How to clean/replace buttons on the Skytex SP728: 6 단계, 이미지 1/1

    • On side the circuit board there will be three buttons. One is the power button, and the other two are volume buttons.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Chris Nelson

회원 가입일: 01/21/15

213 평판

안내서 2개 작성하였습니다

배지: 11

배지 +8개 더

팀

USF Tampa, Team 5-1, Brown Winter 2015 USF Tampa, Team 5-1, Brown Winter 2015 회원

USFT-BROWN-W15S5G1

4 회원들

안내서 11개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 121