주요 콘텐츠로 건너뛰기

부품

지정된 부품이 없습니다.

  1. Turn the DS to the back side.
    • Turn the DS to the back side.

  2. This is the PH00  Screw, Unscrew it.
    • This is the PH00 Screw,

    • Unscrew it.

    • The screw remains captive to the battery cover, you do not need to worry about losing it.

  3. Remove the battery cover. Remove the battery cover.
    • Remove the battery cover.

  4. Wedge the edge on the side of the battery using a spudger. Wedge the edge on the side of the battery using a spudger. Wedge the edge on the side of the battery using a spudger.
    • Wedge the edge on the side of the battery using a spudger.

  5. Take out the battery and leave it for at least 15-30 seconds.
    • Take out the battery and leave it for at least 15-30 seconds.

  6. Reinsert the battery. Make sure the battery matches the + and the - connectors. Make sure the battery matches the + and the - connectors.
    • Reinsert the battery.

    • Make sure the battery matches the + and the - connectors.

  7. Put the cover back on and screw it in. Put the cover back on and screw it in.
    • Put the cover back on and screw it in.

  8. If everything done correctly, You should be at the setup screen, It would look like when you got the ds from the store.
    • If everything done correctly, You should be at the setup screen, It would look like when you got the ds from the store.

    • You can hold A + B + X + Y + R while turning on the system and the ds will boot into a ds cartridge without doing setup, you can boot the Game Pak/GBA Cartridge if you hold A + B + X + Y + L Instead.

결론

To reassemble your device, follow these instructions in reverse order.

Artem Ivat

회원 가입일: 2020년 02월 05일

937 평판

안내서 6개 작성하였습니다

Kid fixers Kid fixers 회원

Community

124 회원들

안내서 103개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 16

30일 전: 94

전체 시간: 210