주요 콘텐츠로 건너뛰기

소개

This tutorial will use how to enter DFU Mode if in case your iPod Classic needs to be restored. And how to restore iPod properly.

  1. Hold the menu and the center button for about 8 seconds until you see the Apple logo. But keep holding when you see apple logo until it off.
    • Hold the menu and the center button for about 8 seconds until you see the Apple logo. But keep holding when you see apple logo until it off.

    • Don't hold too much power on your iPod Classic. If you hold menu and center button too much, then the Menu and Center button dosen't work.

    • Connect your iPod Classic into the computer and click continue. When you the the recovery message, click OK. And click on "Restore iPod" and wait until it finished restore.

결론

After you restore, just sync your music, video or games into your iPod and enjoy. If it dosen’t work, try repeat again this guide.

다른 3명이 해당 안내서를 완성하였습니다.

Nazomi

회원 가입일: 2020년 05월 26일

740 평판

안내서 5개 작성하였습니다

Nazomi Area 1A Nazomi Area 1A 회원

Community

1 회원

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 6

7일 전: 51

30일 전: 301

전체 시간: 3,660