소개
Follow this guide if you are having issues with your audio output with your Kingston HyperX CloudX.
NOTICE: This guide requires taking apart your headphones, if you have not already, please check your audio settings.
필요한 것
-
-
Remove the memory foam from the side of the headphones that are giving the audio problem
-
-
-
-
Remove the four 5.0 mm screws located under each memory foam using a Phillips #1 screwdriver.
-
-
-
Look for wires that are missing from the circuit board.
-
For this repair, our headset was missing a green wire so we will solder that back to the board
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
팀
Eastern Washington University, Team S27-G9, Munoz Fall 2019 Eastern Washington University, Team S27-G9, Munoz Fall 2019 회원
EWU-MUNOZ-F19S27G9
1 회원
안내서 2개 작성하였습니다
