주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

Full video:

This process requires a rework station.

This is common problem with PSP E1000 caused by bad solder joints. This can be fixed with a bit of preheating.

부품

지정된 부품이 없습니다.

동영상 개요

  1. Let's start dismantling. Let's start dismantling. Let's start dismantling.
    • Let's start dismantling.

  2. start by removing the top part and then *gently* "fold" it down to the bottom start by removing the top part and then *gently* "fold" it down to the bottom start by removing the top part and then *gently* "fold" it down to the bottom
    • start by removing the top part and then *gently* "fold" it down to the bottom

  3. Disassembling the screen. Disassembling the screen. Disassembling the screen.
    • Disassembling the screen.

  4. Remove this screw. Remove this screw.
    • Remove this screw.

  5. Insert wisdom here. Insert wisdom here. Insert wisdom here.
    • Insert wisdom here.

  6. Insert wisdom here. Insert wisdom here. Insert wisdom here.
    • Insert wisdom here.

  7. Carefully disconnect the battery connector! Carefully disconnect the battery connector! Carefully disconnect the battery connector!
    • Carefully disconnect the battery connector!

  8. Remove the thermal tape. Remove the thermal tape. Remove the thermal tape.
    • Remove the thermal tape.

  9. You must resolder main processor with Rework Station (this is special equipment). You must resolder main processor with Rework Station (this is special equipment).
    • You must resolder main processor with Rework Station (this is special equipment).

  10. Cleaning and assembling. Cleaning and assembling. Cleaning and assembling.
    • Cleaning and assembling.

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

ZFix

회원 가입일: 2013년 12월 09일

177,254 평판

안내서 317개 작성하였습니다

Master Techs Master Techs 회원

Community

295 회원들

안내서 973개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 25

30일 전: 110

전체 시간: 10,974