소개
The oil in your Carbine should be replaced every 500-1000 shots to maximize its lifetime. Be sure to purchase a 20-weight lubricant. Any other lubricant will cause damage.
필요한 것
-
-
Place the carbine with the saddle ring and leather thong facing upwards.
-
Locate the screw head on the cocking lever.
-
Place a #2 Phillips Screwdriver in the 11/16ths of an inch, matte black screw on the cocking lever assembly. Twist with a counter-clockwise motion.
-
Completely remove the screws.
-
-
-
Remove the cocking lever by placing your dominant hand’s fingers through the cocking lever handle.
-
With your fingers in the handle, slide the lever towards the butt of the carbine.
-
Finally, pull the cocking lever and carbine in opposite directions to replace the cocking lever.
-
-
-
Once the cocking lever is removed, place the carbine with the saddle ring facing upwards.
-
Locate the screws on either side of the saddle ring.
-
Using a #2 Phillips Screwdriver, twist in a counter-clockwise motion.
-
Completely remove the two screws.
-
-
-
-
Now rotate your carbine so the top of the carbine is visible.
-
Locate the screw located above the saddle ring where the black metal meets the wooden butt.
-
Using the same #2 Phillips Screwdriver, twist in a counter-clockwise motion.
-
Completely remove the screw.
-
-
-
Place your dominant hand on the wooden butt and your other hand on the metal barrel.
-
Slide the butt away from the Carbine until it is free of the metal tongs.
-
-
-
Wiggling the firing mechanism and pull it out of the back opening of the carbine.
-
-
-
Locate the oil hole above the center of the forearm.
-
Add two drops of 20 weight oil in the oil hole.
-
-
-
Place two to three drops of oil on the ridged area of the firing mechanism.
-
-
-
Place two to three drops of oil on the cocking lever, to the right of the screw hole.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
다른 한 분이 해당 안내서를 완성하였습니다.
팀
Cal Poly, Team 6-20, Maness Fall 2014 Cal Poly, Team 6-20, Maness Fall 2014 회원
CPSU-MANESS-F14S6G20
4 회원들
안내서 5개 작성하였습니다
