소개

The filter on the Dyson DC14 vacuum needs to be cleaned every six months in order to maintain its peak operating condition.

도구

도구는 필요하지 않습니다.

부품

The filter is located in the canister of your vacuum.
  • The filter is located in the canister of your vacuum.

댓글 쓰기

Open the canister filter compartment.  Push the clip upwards, and open the canister top away from you.
  • Open the canister filter compartment. Push the clip upwards, and open the canister top away from you.

  • Remove the yellow filter housing.

댓글 쓰기

  • Remove the blue sponge-filter from the yellow filter housing.

    • The filter and housing must both be completely dry before reinstalling. Do not use your vacuum without filters installed.

  • Clean the blue sponge-filter in cold water until the water runs clear.

댓글 쓰기

결론

Once the filter is cleaned, set the blue filter sponge and the yellow filter housing aside for at least 24 hours to dry. Do not use your vacuum without a filter, or when the filter is still wet. To reassemble, follow the steps in reverse order.

다른 8명이 해당 안내서를 완성하였습니다.

Donald Percivalle

회원 가입일: 2012년 10월 03일

1,162 평판

안내서 4개 작성하였습니다

Cal Poly, Team 3-22, Amido Fall 2012 Cal Poly, Team 3-22, Amido Fall 2012 회원

CPSU-AMIDO-F12S3G22

4 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 23

지난 7일: 105

지난 30일: 477

전체 시간: 21,451