주요 콘텐츠로 건너뛰기

How to remove and clean the Dyson DC14 filter

필요한 것

  1. How to remove and clean the Dyson DC14 filter, How to remove and clean the Dyson DC14 filter: 1 단계, 이미지 1/1
    • The filter is located in the canister of your vacuum.

  2. How to remove and clean the Dyson DC14 filter: 2 단계, 이미지 1/3 How to remove and clean the Dyson DC14 filter: 2 단계, 이미지 2/3 How to remove and clean the Dyson DC14 filter: 2 단계, 이미지 3/3
    • Open the canister filter compartment. Push the clip upwards, and open the canister top away from you.

    • Remove the yellow filter housing.

  3. How to remove and clean the Dyson DC14 filter: 3 단계, 이미지 1/1
    • Remove the blue sponge-filter from the yellow filter housing.

    • The filter and housing must both be completely dry before reinstalling. Do not use your vacuum without filters installed.

    • Clean the blue sponge-filter in cold water until the water runs clear.

결론

Once the filter is cleaned, set the blue filter sponge and the yellow filter housing aside for at least 24 hours to dry. Do not use your vacuum without a filter, or when the filter is still wet. To reassemble, follow the steps in reverse order.

다른 17명이 해당 안내서를 완성하였습니다.

Donald Percivalle

회원 가입일: 10/03/12

1,923 평판

안내서 4개 작성하였습니다

Cal Poly, Team 3-22, Amido Fall 2012 Cal Poly, Team 3-22, Amido Fall 2012 회원

CPSU-AMIDO-F12S3G22

4 회원들

안내서 8개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 17

30일 전: 98

전체 시간: 39,716