물건을 수리하세요 커뮤니티 상점

How to reset the PIN of a Flipper Zero

소개

If you forget your Flipper Zero PIN, the only way to regain access to your device is to perform a factory reset, which will erase all data on the device, including the existing PIN. After the factory reset, you'll be able to set a new PIN and regain access to your device.

The dolphin's level, settings, and information about paired devices will be erased. Data saved on the microSD card will not be lost.

  1. How to reset the PIN of a Flipper Zero, Reset your PIN: 1 단계, 이미지 1개 중 1개

    • Hold the Up- and Back-buttons for 30 seconds.

    편집

  3. How to reset the PIN of a Flipper Zero, Confirm the Reset: 2 단계, 이미지 1개 중 1개

    • Confirm the reset procedure by holding the Right-button.

    편집
결론

Try to remember your PIN next time!

다른 4명이 해당 안내서를 완성하였습니다.

작성자

3다른 기여자 명과 함께

Sebastian

회원 가입일: 08/19/18

31,157 평판

안내서 71개를 작성함

배지: 45

배지 +42개 더

4가이드 댓글

Every time I attempt this, it goes black 20 seconds in the 30 seconds and resets the locked timer.

vmmmp - 답글

You have to wait until the timer ends and it asks for the passcode again. Only THEN can you perform the steps. I just successfully did so after experiencing the same issue as you.

Massimo Cracchiolo - 답글

If i do the same steps my flipper says: Flipper crashed and was rebooted HardFault. What can i do? is there maybe another way ?

Anke Seeland (Ankmaus) - 답글

i got the pin for the flipper : Left Up Right Down = press Insert

Cezar Khaloul - 답글

댓글 쓰기

조회 통계:

지난 24시간: 5

지난 7일: 31

지난 30일: 174

전체 시간: 14,021