기기를 수리하세요 커뮤니티 상점

Huawei MediaPad M3 Charging Port Replacement

소개

The Charging Port on the Huawei MediaPad M3 can go defunct and cause issues when trying to keep or fully charge the device. This guide will serve to show how to replace the charging port in the quickest and most efficient way.

필요한 것

  1. Huawei MediaPad M3 Charging Port Replacement, Charging Port: 1 단계, 이미지 1/1

    • Using the TE-03 Metal Wedge Tool, remove the display by gently sliding it under the edge of the display.

    번역하기

  2. Huawei MediaPad M3 Charging Port Replacement: 2 단계, 이미지 1/1

    • Use a Phillips #00 screwdriver to remove three 3.0mm screws from the metal casing on the charging port.

    번역하기

  4. Huawei MediaPad M3 Charging Port Replacement: 3 단계, 이미지 1/1

    • Using the Phillips #00 screwdriver, remove the eight screws.

    번역하기

  5. Huawei MediaPad M3 Charging Port Replacement: 4 단계, 이미지 1/1

    • Using the tweezers, remove the ribbon cable from the charging port.

    번역하기

  6. Huawei MediaPad M3 Charging Port Replacement: 5 단계, 이미지 1/1

    • Using the tweezers, remove the black piece attached to the green charging port.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 3

7일 전: 4

30일 전: 17

전체 시간: 1,962