Huawei P9 Back Cover - iFixit 수리 안내서

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

소개

Use this guide to open your Huawei P9 smartphone.

필요한 것

1 단계 Back Cover

Huawei P9 Back Cover, Back Cover: 1 단계, 이미지 1/3

Huawei P9 Back Cover, Back Cover: 1 단계, 이미지 2/3

Huawei P9 Back Cover, Back Cover: 1 단계, 이미지 3/3

First switch off your phone and remove the SIM card tray.
Unscrew the two Pentalobe P2 screws located at the bottom next to the device's USB C port.
If the screen is cracked you might want to use some tape to protect your eyes from glass shreds and get a better grip to open the phone.

2 단계

Huawei P9 Back Cover: 2 단계, 이미지 1/2

Huawei P9 Back Cover: 2 단계, 이미지 2/2

Avoid to lift only the display instead of the whole phone assembly as doing so may cause damage to the screen.
Use an iSclack or a suction handle to separate the phone assembly from the rear panel.
In case you can‘t manage to lift the phone assembly out of the rear panel you can insert the pointed end of a spudger in the headphone jack opening and press the phone assembly upwards until you create a gap between assembly and rear panel. Then use the spudger to lever the phone assembly out of the panel.
Don't remove the rear panel completely yet. There is a cable connected to it! It is running from the finger print sensor to the display unit.

3 단계 Fingerprint sensor

Huawei P9 Back Cover, Fingerprint sensor: 3 단계, 이미지 1/2

Huawei P9 Back Cover, Fingerprint sensor: 3 단계, 이미지 2/2

Disconnect the fingerprint sensor using a spudger.

결론

To reassemble your device, follow these instructions in reverse order.

다른 7명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 6명과 함께

Tobias Isakeit

회원 가입일: 03/31/14

117,296 평판

안내서 188개 작성하였습니다

배지 +43개 더

팀

Master Techs Master Techs 회원

Community

322 회원들

안내서 2,523개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 5

전체 시간: 8,930