주요 콘텐츠로 건너뛰기

Hytera TC-580 Microphone Replacement

필요한 것

  1. Hytera TC-580 Microphone Replacement, Battery: 1 단계, 이미지 1/2 Hytera TC-580 Microphone Replacement, Battery: 1 단계, 이미지 2/2
    • Remove the two 10mm Phillips #0 from the belt clip.

  2. Hytera TC-580 Microphone Replacement: 2 단계, 이미지 1/2 Hytera TC-580 Microphone Replacement: 2 단계, 이미지 2/2
    • Push in the release button and pull up on the battery to remove.

  3. Hytera TC-580 Microphone Replacement, Antenna: 3 단계, 이미지 1/1
    • Twist antenna counter-clockwise and set damaged antenna aside.

  4. Hytera TC-580 Microphone Replacement, Keypad: 4 단계, 이미지 1/1
    • Remove the volume knob by firmly lifting up on both sides of it.

  5. Hytera TC-580 Microphone Replacement: 5 단계, 이미지 1/1
    • Remove the orange o-ring around volume knob using tweezers.

  6. Hytera TC-580 Microphone Replacement: 6 단계, 이미지 1/1
    • Remove grey nut from base of volume knob by turning it counterclockwise with a set of tweezers.

  7. Hytera TC-580 Microphone Replacement: 7 단계, 이미지 1/1
    • Remove the brass washer from the base of the antenna slot by turning it counterclockwise with a set of tweezers.

  8. Hytera TC-580 Microphone Replacement: 8 단계, 이미지 1/2 Hytera TC-580 Microphone Replacement: 8 단계, 이미지 2/2
    • Remove the two 15mm T8 Torx screws from the base of the battery cavity.

  9. Hytera TC-580 Microphone Replacement: 9 단계, 이미지 1/1
    • Using a plastic opening tool, pry in between the plastic case and metal circuit board to remove the board.

  10. Hytera TC-580 Microphone Replacement: 10 단계, 이미지 1/1
    • Peel off the keypad by hand.

  11. Hytera TC-580 Microphone Replacement, Speaker: 11 단계, 이미지 1/3 Hytera TC-580 Microphone Replacement, Speaker: 11 단계, 이미지 2/3 Hytera TC-580 Microphone Replacement, Speaker: 11 단계, 이미지 3/3
    • Remove eleven 4mm Phillips #00 screws.

  12. Hytera TC-580 Microphone Replacement: 12 단계, 이미지 1/1
    • Apply a soldering iron to the solder joints to remove the two wires connecting the speaker to the circuit board.

  13. Hytera TC-580 Microphone Replacement, Microphone: 13 단계, 이미지 1/1
    • If not already done, remove the circuit board completely from the case.

  14. Hytera TC-580 Microphone Replacement: 14 단계, 이미지 1/1
    • Desolder the two microphone solder joints.

  15. Hytera TC-580 Microphone Replacement: 15 단계, 이미지 1/1
    • The microphone should fall out after all the solder has been removed.

결론

To reassemble your device, follow these instructions in reverse order.

Stuart

회원 가입일: 02/14/18

464 평판

안내서 3개 작성하였습니다

USF Tampa, Team S3-G4, Nance Spring 2018 USF Tampa, Team S3-G4, Nance Spring 2018 회원

USFT-NANCE-S18S3G4

3 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 6

전체 시간: 709