ION Electric Ice Auger Safety Paddle Replacement - iFixit 수리 안내서

소개

Use this guide to replace a broken safety paddle on your ION electric ice auger.

필요한 것

1 단계 ION Electric Ice Auger Safety Paddle

ION Electric Ice Auger Safety Paddle Replacement, ION Electric Ice Auger Safety Paddle: 1 단계, 이미지 1/1

Before starting this repair, ensure that the battery has been removed from the power head.
Removing the power head from the the auger makes manipulating the unit easier.

2 단계

ION Electric Ice Auger Safety Paddle Replacement: 2 단계, 이미지 1/1

On the inside of the trigger side grip, locate the 3 T10 torque screws recessed into the grip.

3 단계

ION Electric Ice Auger Safety Paddle Replacement: 3 단계, 이미지 1/1

With a T10 torque screw driver, remove the 3 screws.

4 단계

ION Electric Ice Auger Safety Paddle Replacement: 4 단계, 이미지 1/1

Remove the outside half of the trigger side grip.

5 단계

ION Electric Ice Auger Safety Paddle Replacement: 5 단계, 이미지 1/1

With a pair of needle nosed pliers, remove the safety paddle return spring.

6 단계

ION Electric Ice Auger Safety Paddle Replacement: 6 단계, 이미지 1/1

Remove the broken safety paddle with your fingers.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Grant Larson

회원 가입일: 04/26/16

125 평판

안내서 1개 작성함

팀

Michigan Tech, Team 4-16, Lauer Spring 2016 Michigan Tech, Team 4-16, Lauer Spring 2016 회원

MTU-LAUER-S16S4G16

1 회원

안내서 1개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 3,879