기기를 수리하세요 커뮤니티 상점

India Mark II Head Section Replacement

보관된 가이드
해당 안내서는 단지 역사적인 목적으로 보관됩니다. 최신 버전 안내서를 사용하여 수리 하십시오.

소개

Remove and or replace the head section of the India Mark II water hand pump.

필요한 것

  1. India Mark II Head Section Replacement, Cover Plate: 1 단계, 이미지 1/1

    • Use a wrench to remove the bolt on the top of the cover plate.

    • When replacing the cover plate, this bolt only needs to be hand tight.

    편집

  2. India Mark II Head Section Replacement: 2 단계, 이미지 1/1

    • Remove the top cover by pulling it straight off the pump.

    • Store the top cover in a sanitary place, preferably above ground, to prevent contamination.

    편집

  4. India Mark II Head Section Replacement, Head Section: 3 단계, 이미지 1/3 India Mark II Head Section Replacement, Head Section: 3 단계, 이미지 2/3 India Mark II Head Section Replacement, Head Section: 3 단계, 이미지 3/3

    • Pull the pump handle all the way down and hold it in this position, exposing the pump rod.

    • Place the spacer around the pump rod and under the chain attachment point.

    • Make sure the spacer is beveled side down, and flat side up.

    • Lift the pump lever until there is no tension in the chain and hold it in this position.

    편집

  5. India Mark II Head Section Replacement: 4 단계, 이미지 1/2 India Mark II Head Section Replacement: 4 단계, 이미지 2/2

    • Remove the bolt connecting the chain to the pump handle.

    • Remove the chain from the handle.

    편집

  6. India Mark II Head Section Replacement: 5 단계, 이미지 1/3 India Mark II Head Section Replacement: 5 단계, 이미지 2/3 India Mark II Head Section Replacement: 5 단계, 이미지 3/3

    • There are 4 bolts securing the head section to the water tank, located at the corners of head section base.

    • Continue supporting the pump handle so the pump head doesn't fall off when all the bolts are removed.

    • Remove the 4 bolts on the base of the water tank.

    편집

  7. India Mark II Head Section Replacement: 6 단계, 이미지 1/1

    • Lift the pump head off of the water tank and place in a sanitary place, preferably above ground, to prevent contamination.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 4명과 함께

Phillip Takahashi

회원 가입일: 08/22/11

86,704 평판

안내서 87개 작성하였습니다

배지: 43

배지 +40개 더

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 662