기기를 수리하세요 커뮤니티 상점

Insignia 6-Quart Pressure Cooker Circuit Board Replacement

소개

Circuit boards may require replacement after consistent use. This guide will show how to remove the circuit board.

필요한 것

  1. Insignia 6-Quart Pressure Cooker Circuit Board Replacement, Circuit Board and Power Cord: 1 단계, 이미지 1/1

    • Use a Phillips head #2 screwdriver to remove the 6mm screw.

    편집

  2. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 2 단계, 이미지 1/1

    • Twist the light grey plastic until the holes align with the blockers.

    • Remove the light grey plastic cover.

    편집

  3. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 3 단계, 이미지 1/1

    • Remove the power cord from the slot it is inserted in.

    편집

  4. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 4 단계, 이미지 1/1

    • Use a Phillips head #2 screwdriver to remove the 22mm screw connected to the black wire.

    편집

  5. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 5 단계, 이미지 1/1

    • Use a Phillips head #2 screwdriver to remove the 8mm screw and it's washer from the red wire.

    편집

  7. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 6 단계, 이미지 1/1

    • Use a Phillips head #2 screwdriver to remove the 8mm screw and it's washer from the blue wire.

    편집

  8. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 7 단계, 이미지 1/1

    • Pinch the small white component connected to the circuit board.

    • Once pinched, wiggle this component until it is disconnected.

    편집

  9. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 8 단계, 이미지 1/1

    • Pinch the red component connected to the circuit board.

    • Once pinched, wiggle this component until it is disconnected.

    편집

  10. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 9 단계, 이미지 1/1

    • Wiggle the wide white component until it is removed from the circuit board.

    편집

  11. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 10 단계, 이미지 1/1

    • Use a J1 head screwdriver to remove the 8mm screws from both sides of the circuit board.

    편집

  12. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 11 단계, 이미지 1/1

    • Use a Phillips head #2 screwdriver to remove both 15mm screws from either side of the circuit board, indicated in the picture.

    편집

  13. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 12 단계, 이미지 1/1

    • Position the pressure cooker so that the circuit board is farther from you then the black, red, and blue wire connections.

    • To the right of the board, use a Phillips head #2 screwdriver to remove the 6mm screw.

    편집

  14. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 13 단계, 이미지 1/1

    • Use a Phillips head #2 screwdriver to remove the 6mm screw behind and to the right of the circuit board tray.

    편집

  15. Insignia 6-Quart Pressure Cooker Circuit Board Replacement: 14 단계, 이미지 1/1

    • Remove and replace the circuit board.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 5명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 5명과 함께

Savannah Webb

회원 가입일: 01/18/18

657 평판

안내서 5개 작성하였습니다

배지: 7

배지 +4개 더

팀

Cal Poly, Team S12-G3, Banghart Winter 2018 Cal Poly, Team S12-G3, Banghart Winter 2018 회원

CPSU-BANGHART-W18S12G3

4 회원들

안내서 5개 작성하였습니다

댓글 8개

Where do you purchase the circuit board

Douglas Koons - 답글

Hi, thanks for the guide. Where could I purchase the circuit board?

Anthea - 답글

Please, Where can I buy the electrical circuit?

Mohammed - 답글

why is my circuit board not fixed to the top like in the diagram

david stanley - 답글

where can I purchase the circuit board

de27@bellsouth.net - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 10

전체 시간: 3,141