기기를 수리하세요 커뮤니티 상점

Insignia Ice Maker NS-IMP26SS7 Fan Replacement

소개

This guide will show the steps required to disassemble an Insignia Ice Maker and replace the fan inside. It should take approximately 5-10 minutes.

필요한 것

  1. Insignia Ice Maker NS-IMP26SS7 Fan Replacement, Fan: 1 단계, 이미지 1/2 Insignia Ice Maker NS-IMP26SS7 Fan Replacement, Fan: 1 단계, 이미지 2/2

    • Undo the 6 Screws found on the bottom edge holding the rear casing on.

    번역하기

  2. Insignia Ice Maker NS-IMP26SS7 Fan Replacement: 2 단계, 이미지 1/1

    • Pull the casing off.

    번역하기

  4. Insignia Ice Maker NS-IMP26SS7 Fan Replacement: 3 단계, 이미지 1/2 Insignia Ice Maker NS-IMP26SS7 Fan Replacement: 3 단계, 이미지 2/2

    • Locate the fan on the side of the Ice maker and undo the 4 screws holding it in place.

    번역하기

  5. Insignia Ice Maker NS-IMP26SS7 Fan Replacement: 4 단계, 이미지 1/2 Insignia Ice Maker NS-IMP26SS7 Fan Replacement: 4 단계, 이미지 2/2

    • Remove the cover from the circuit board by pressing against the lever to the side. A pry tool may be needed.

    번역하기

  6. Insignia Ice Maker NS-IMP26SS7 Fan Replacement: 5 단계, 이미지 1/3 Insignia Ice Maker NS-IMP26SS7 Fan Replacement: 5 단계, 이미지 2/3 Insignia Ice Maker NS-IMP26SS7 Fan Replacement: 5 단계, 이미지 3/3

    • Follow the fan's power cable and unplug.

    • You may have to cut a zip tie holding the cable in place.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Evan Taylor

회원 가입일: 01/18/18

616 평판

안내서 5개 작성하였습니다

배지: 8

배지 +5개 더

팀

Cal Poly, Team S21-G3, Banghart Winter 2018 Cal Poly, Team S21-G3, Banghart Winter 2018 회원

CPSU-BANGHART-W18S21G3

2 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 8

30일 전: 26

전체 시간: 1,599