기기를 수리하세요 커뮤니티 상점

Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement

소개

This guide will show the required steps to replace the ice tray on the Insignia Ice Maker.

필요한 것

  1. Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement, Water Tray: 1 단계, 이미지 1/3 Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement, Water Tray: 1 단계, 이미지 2/3 Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement, Water Tray: 1 단계, 이미지 3/3

    • Remove the 6 screws holding the rear casing on.

    • Remove the rear casing

    편집

  2. Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: 2 단계, 이미지 1/3 Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: 2 단계, 이미지 2/3 Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: 2 단계, 이미지 3/3

    • Remove the 4 screws holding the Ice Tray to the body of the Ice Maker.

    편집

  4. Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: 3 단계, 이미지 1/3 Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: 3 단계, 이미지 2/3 Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: 3 단계, 이미지 3/3

    • Remove the 4 screws holding the Ice Tray from the top.

    편집

  5. Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: 4 단계, 이미지 1/2 Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: 4 단계, 이미지 2/2

    • Lift the Water Pump out of the way

    편집

  6. Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: 5 단계, 이미지 1/3 Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: 5 단계, 이미지 2/3 Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: 5 단계, 이미지 3/3

    • Remove the final 2 screws.

    편집

  7. Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: 6 단계, 이미지 1/3 Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: 6 단계, 이미지 2/3 Insignia Ice Maker NS-IMP26SS7 Ice Tray Replacement: 6 단계, 이미지 3/3

    • Remove the plastic cover from the circuit board by pressing the lever on the side. A pry tool may be required.

    • Disconnect the water tray cord.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Evan Taylor

회원 가입일: 01/18/18

616 평판

안내서 5개 작성하였습니다

배지: 8

배지 +5개 더

팀

Cal Poly, Team S21-G3, Banghart Winter 2018 Cal Poly, Team S21-G3, Banghart Winter 2018 회원

CPSU-BANGHART-W18S21G3

2 회원들

안내서 5개 작성하였습니다

댓글 3개

Where do I find insignia ice maker ns- imp26ss7 replacement ice forming tray? Can't locate item on the internet.

razorbllade - 답글

I found a seller on ebay that has 7 of them and is selling them for $20 shipped

er.vanlaarhoven -

https://www.ebay.com/itm/266028470753?ha...

er.vanlaarhoven -

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 18

30일 전: 63

전체 시간: 2,975