주요 콘텐츠로 건너뛰기

Insignia NS-B4111 Casing Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. Insignia NS-B4111 Casing  Replacement, Casing: 1 단계, 이미지 1/1
    • Turn the boombox upside down again. With the Phillips PH1 or the Flathead #3 screwdriver, remove the three 14mm black screws.

    • Remove the four 18mm chrome screws with the Phillips PH1 screwdriver.

  2. Insignia NS-B4111 Casing  Replacement: 2 단계, 이미지 1/2 Insignia NS-B4111 Casing  Replacement: 2 단계, 이미지 2/2
    • Gently remove the bottom half of the casing from the top half of the casing.

    • The antenna base is connected to the motherboard by a red wire. This wire will prevent the two halves from separating completely.

결론

To reassemble your device, follow these instructions in reverse order.

Kristin Yoshioka

회원 가입일: 09/21/16

984 평판

안내서 9개 작성하였습니다

UC Davis, Team 1-5, Oliver Fall 2016 UC Davis, Team 1-5, Oliver Fall 2016 회원

UCD-OLIVER-F16S1G5

5 회원들

안내서 11개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 46