Insignia NS-B4111 Motherboard Replacement - iFixit 수리 안내서

필요한 것

1 단계 Motherboard

Insignia NS-B4111 Motherboard Replacement, Motherboard: 1 단계, 이미지 1/1

Unscrew the four 12.5mm screws with the Phillips PH1 Screwdriver.
Unscrew the one 10mm long screw with the Phillips PH1 Screwdriver.

2 단계

Insignia NS-B4111 Motherboard Replacement: 2 단계, 이미지 1/1

Orient the device so that the back is facing you.
Unplug the six pin male/female header from its socket on the motherboard. The wires on the header are these colors: burgundy, red, orange, yellow, green, and blue.
Use a tweezer if you find it hard to pull the header out with your fingers.
Gently pull out the ribbon cable from its socket on the motherboard.
Pay attention to the orientation of the header and the ribbon cable. Replacing the wires the wrong way may short circuit the board.

3 단계

Insignia NS-B4111 Motherboard Replacement: 3 단계, 이미지 1/1

Rotate the device so that the front is facing you.
Unplug the four pin header from its socket on the motherboard. The wires on the header are these colors: brown, red, orange, and yellow.
Use a tweezer if you find it hard to pull this header out with your fingers.
Gently pull out the ribbon cable from its socket.
Pay attention to the orientation of the header and the ribbon cable. Replacing the base the wrong way may short circuit the board.

4 단계

Insignia NS-B4111 Motherboard Replacement: 4 단계, 이미지 1/1

Pull out the two pin header from its socket on the motherboard. The wires on this header are black and white.
Use a tweezer if you find it hard to pull this cable out with your fingers.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 4명과 함께

Kristin Yoshioka

회원 가입일: 09/21/16

984 평판

안내서 9개 작성하였습니다

배지 +4개 더

팀

UC Davis, Team 1-5, Oliver Fall 2016 UC Davis, Team 1-5, Oliver Fall 2016 회원

UCD-OLIVER-F16S1G5

5 회원들

안내서 11개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 71