기기를 수리하세요 커뮤니티 상점

Insignia NS-CLOPP2 Antenna Replacement

필요한 것

  1. Insignia NS-CLOPP2 Antenna Replacement, Antenna: 1 단계, 이미지 1/1

    • Follow steps on removing the motherboard as a prerequisite.

    • Gently move the motherboard back, revealing the thin black wire that is the antenna. The antenna wire is, on the outside, located on the lower, middle back. Follow the wire from the outside to the inside to make sure it's the correct one.

    번역하기

  2. Insignia NS-CLOPP2 Antenna Replacement: 2 단계, 이미지 1/1

    • Pull the wire up, making sure it's connected to the motherboard from the back side. To replace the wire, cut it completely from the motherboard.

    번역하기

  4. Insignia NS-CLOPP2 Antenna Replacement: 3 단계, 이미지 1/1

    • To re-attach the antenna cord to the motherboard, use a soldering tool to connect the wire to the same spot it was originally attached to.

    번역하기

  5. Insignia NS-CLOPP2 Antenna Replacement: 4 단계, 이미지 1/1

    • Make sure the wire is securely in place in the correct area of the clock, labeled "antenna" from the outside.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

Dilini De Silva

회원 가입일: 03/11/15

757 평판

안내서 5개 작성하였습니다

배지: 9

배지 +6개 더

팀

Marist, Team 1-1, Laflen Spring 2015 Marist, Team 1-1, Laflen Spring 2015 회원

MARS-LAFLEN-S15S1G1

2 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 111