주요 콘텐츠로 건너뛰기

Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement

필요한 것

  1. Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement, Bluetooth Button: 1 단계, 이미지 1/1
    • Remove the rubber sleeve.

  2. Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: 2 단계, 이미지 1/2 Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: 2 단계, 이미지 2/2
    • Remove 4 screws from the green, plastic button cover.

  3. Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: 3 단계, 이미지 1/2 Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: 3 단계, 이미지 2/2
    • After successfully removing the plastic cover, use a sauter against the bluetooth button. The heat will make the removal of the button easy.

    • Place the new bluetooth button in the place of the old bluetooth button and mend the button into place using heat.

  4. Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: 5 단계, 이미지 1/3 Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: 5 단계, 이미지 2/3 Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: 5 단계, 이미지 3/3
    • Screw the 4 screws of the plastic button cover back onto the device.

  5. Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: 6 단계, 이미지 1/1
    • Put the plastic sleeve back onto the speaker.

결론

To reassemble your device, follow these instructions in reverse order.

Erin Steele

회원 가입일: 03/08/17

649 평판

안내서 5개 작성하였습니다

UMass Dartmouth, Team S5-G2, Botvin Spring 2017 UMass Dartmouth, Team S5-G2, Botvin Spring 2017 회원

UMASSD-BOTVIN-S17S5G2

2 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 59