이 버전에는 잘못된 편집 사항이 있을 수 있습니다. 최신 확인된 스냅샷으로 전환하십시오.
필요한 것
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Unscrew the single 12.0 mm Phillips #2 screw on the right side of the bottom of the vacuum head.
-
Lift and pull up on the brush retention clip.
-
Pull brush up and out to remove.
-
-
거의 끝나갑니다!
결승점