Insignia NS-VCS14SL7 Motor Replacement - iFixit 수리 안내서

소개

The Insignia 2-in-1 Handheld/Stick vacuum can lose its ability to create suction. Use this guide to access the vacuum's motor for replacement and troubleshooting.

필요한 것

1 단계 Battery

Insignia NS-VCS14SL7 Motor Replacement, Battery: 1 단계, 이미지 1/2

Insignia NS-VCS14SL7 Motor Replacement, Battery: 1 단계, 이미지 2/2

Push down the black button to release the dust cup.
Pull the dust cup up and away from handheld portion to remove.

2 단계

Insignia NS-VCS14SL7 Motor Replacement: 2 단계, 이미지 1/3

Insignia NS-VCS14SL7 Motor Replacement: 2 단계, 이미지 2/3

Insignia NS-VCS14SL7 Motor Replacement: 2 단계, 이미지 3/3

Remove the five 12.0 mm screws on the back of the handheld portion using the Phillips #2 screwdriver.
Lift the silver cover off of the black body of the handheld portion to expose the battery and wiring.

3 단계

Insignia NS-VCS14SL7 Motor Replacement: 3 단계, 이미지 1/2

Insignia NS-VCS14SL7 Motor Replacement: 3 단계, 이미지 2/2

Pull apart the red and black wires.
Do so for all of the wires. (Red x1, Black x2)

4 단계

Insignia NS-VCS14SL7 Motor Replacement: 4 단계, 이미지 1/1

Remove the tape holding the battery to the black housing.
Slide the entire battery bundle out.

5 단계 Motor

Insignia NS-VCS14SL7 Motor Replacement, Motor: 5 단계, 이미지 1/2

Insignia NS-VCS14SL7 Motor Replacement, Motor: 5 단계, 이미지 2/2

Use plastic spudger to remove blue wire from motor, freeing the motor.

6 단계

Insignia NS-VCS14SL7 Motor Replacement: 6 단계, 이미지 1/2

Insignia NS-VCS14SL7 Motor Replacement: 6 단계, 이미지 2/2

Twist and pull black casing off of the motor, leaving the motor and irremovable black impeller housing.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Thibaut Pillot

회원 가입일: 02/15/18

434 평판

안내서 5개 작성하였습니다

팀

USF Tampa, Team S16-G3, Boczar Spring 2018 USF Tampa, Team S16-G3, Boczar Spring 2018 회원

USFT-BOCZAR-S18S16G3

4 회원들

안내서 12개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 5

전체 시간: 351